Room Calibration Process - Dell Visor VRC100 User Manual

Room Calibration Process

Before you use the headset, you can set up a boundary to help guide your movements when you cannot see your surroundings.
NOTE: Skipping this step will not impact your ability to interact with the HMD. However, in case you choose to skip it, it is
encouraged that you remain seated or otherwise remain stationary when using the HMD.
1 Follow the room boundary instructions as shown above.
3 Complete the perimeter and come back to where you started.
NOTE: To make adjustments to your defined boundary, you must start all over
again.
CAUTION: Upon completion of the boundary setup, ensure you do not place any objects such as a chair or table since this may
cause you to trip or strike against the objects when in the Mixed Reality experience.
Interpupillary Distance (IPD) Calibration
The Dell Visor VR118 Headset does not have a mechanical Interpupillary Distance adjustment. The Windows Mixed Reality comes with
software IPD adjustment which improves image distortion and depth accuracy based on your IPD. To change IPD within your headset, open
the Settings app and navigate to Mixed Reality > Headset Display and move the slider control. You will see changes in real time in your
headset. If you know your IPD, maybe from a visit to an optometrist, you can enter it directly as well. You can also adjust this setting by
going to Settings > Mixed Reality > Headset Display on your computer.
18 Setting up the Windows Mixed Reality experience
2 Begin at your computer and walk around the perimeter of
your space with your headset.