Silvercrest SWK 360 A1 User Manual page 8

By installing these mounts, the camera can fix to helmets,bikes,cars and your wrist.
Please refer to below steps to install the mounts.
Fix the camera to a helmet
1. Fix connector  to mount A.
2. Unscrew the cap of connector , then push the orbicular end of connector  into
connector . Tighten up the cap of connector .
3. Connect the camera to the screw end of connector .
4. After fix the camera to the mounts is complete, please adjust the length of strap
according to helmet's size. Then tie up the strap to your helmet


+
+ +
7