Table of Contents
Advertisement
Product Drawings
Installation
The installation of the IoT Gateway is only one step process:
1- Connect AC Adapter to the Gateway and plug it into AC outlet. The Gateway has no Power Switch. It will power up as soon
as plugged in the AC Adapter.
If you don't use LTE network connection, the Gateway needs to be connected to internet via LAN port.
LED Normal Operation
-
LTE LED turns ON when LTE connection established.
-
WLAN LED turns ON when Access Point function is enabled, and blinks when received a packet.
-
Z-Wave LED turns ON when Z-Wave function is ready, and blinks when received a packet.
-
BLE LED turns ON when BLE function is ready, and blinks when received a packet.
-
LAN LED blinks when received a packet via LAN port.
-
Power LED always ON when powered.
Front side
Back side
Advertisement
Table of Contents
