Displaying The Status And Adjusting The Cue Outputs Or Studio Speaker Outputs (Nuage Master) - Yamaha NUAGE MASTER Ncs500-CT Operation Manual

Displaying the status and adjusting the Cue outputs or Studio Speaker
outputs (Nuage Master)
Using the CUES section of Nuage Master, the status of the Cue outputs and Studio Speaker outputs of the MMP1 can be
displayed, and the output levels can be adjusted.
CUES section
1
3
2
Cues page
1 Switches the operable controls between Main Monitor output and Headphone output.
2 Indicates the output status of Cue outputs 1-8 or Studio Speaker outputs 1-8: on (lit) and off (unlit).
3 Displays the meters of Cue outputs 1-8 or Studio Speaker outputs 1-8.
4 For adjusting the levels of Cue outputs 1-8 levels or Studio Speaker outputs 1-8.
These controls are linked with MMP1 Editor controls enclosed in the red frames.
1 Displays the "CUES" page on the [Multi function display].
2 Displays the status of Cue outputs 1-4.
Output levels of less than -40 dB are dark, from -40 dB to less than -20 dB are displayed
in green, from -20 dB to less than -0 dB are displayed in orange, and clipping is
displayed in red.
3 Indicates the mute status of Cue outputs 1-4: on (lit) and off (unlit).
1
2
3
4
Added functions in NUAGE V2.0 57