Canon H1 Service Manual page 93

5
Adjustment > Adjustment Method (DADF) > White level adj
12) Remove the paper from the copyboard glass, and place it on the original tray of the
DADF.
13) Press [DF-WLVL4] on the touch panel to highlight.
14) Press [OK].
- The machine executes auto adjustment (duplex stream reading).
- When the adjustment ends normally, the machine indicates 'OK!' on the screen.
15) If the color adjustment fails, perform steps 9) to 14) again.
16) Come out of a service mode.
5 Adjustment > Adjustment Method (DADF) > White level adj
5-14
5-14