Setting The Clock - Sony XR-C8220R Operating Instructions Manual

Caution alarm
If you turn the ignition key switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds
(only when the POWER SELECT switch on the
bottom of the unit is set to the A position).
If you connect an optional power amplifier and
do not use the built-in amplifier, the beep
sound will be deactivated.
TIR indicator (XR-C8220R only)
If you pull out the ignition key while the TIR
function is on, the TIR indicator flashes a few
times. (only when the POWER SELECT switch
on the bottom of the unit is set to the A
position).
For more information on the TIR function,
refer to "Recording the traffic announcements"
(page 15).
TIR indicator

Setting the clock

The clock uses a 24-hour digital indication.
Example: To set the clock to 10:08
1
Press (SHIFT), then press (3) (SET UP)
repeatedly until "Clock" appears.
SET UP
1 Press (5) (n).
SET UP
The hour indication flashes.
2 Set the hour.
to go backward
to go forward
SET UP
3 Press (5) (n).
SET UP
The minute indication flashes.
4 Set the minute.
to go backward
to go forward
SET UP
continue to next page n
7