Page 1
Installation Manual and Programming Tables Vol. 2 Please read this manual first and then the Installation Manual. In this manual, the last letter “RU” or “CE”of each model number is omitted. ROM Version : KX-TD816RU — P371A/P372A; KX-TD1232RU — P271A/P272A; and later versions...
Table of Contents Additions to KX-TD816/1232 Section 1.4, Options 16 SLT Line Circuit Unit (KX-TD174)................6 Auxiliary Connection for Power Failure Transfer...............7 ISDN 6-S0 Line Unit (KX-TD286)..................7 Section 2.4, Installation of Optional Cards and Units 16 SLT Circuit Line Connection ..................8 Installing Expansion Unit (KX-TD174)................8 Cable Pin Numbers to Be Connected ..................9 Installing Expansion Unit (KX-TD286)................10...
Page 3
Table of Contents [428] ISDN TEI Mode .......................40 [429] ISDN Extension Multiple Subscriber Number ............40 [430] ISDN Extension Progress Tone ................40 [612] Incoming Call Display....................41 [613] ISDN Class of Service ....................41 [614] Outgoing Permitted CO Line Assignment– Day for ISDN Extension .....42 [615] Outgoing Permitted CO Line Assignment–...
Options 16 SLT Line Circuit Unit (KX-TD174) Each unit adds eight extensions which contain two single line telephones. The unit can support 16 single line telephones per unit. One unit for the KX-TD816 and up to two units for the KX-TD1232 can be installed per system.
Options Auxiliary Connection for Power Failure Transfer When there is a power failure, the first two jacks on this unit can be connected to specific CO lines mentioned below. An auxiliary connection is required to implement this feature. For more information about the connection between an extension jack to a CO line, refer to the “2.5 Auxiliary Connection for Power Failure Transfer”...
Installation of Optional Cards and Units 16 SLT Circuit Line Connection Installing one unit to the system allows 16 single line telephones (SLT’s) to be connected to jacks 09 through 16 for the KX-TD816, or jacks 17 through 24 or jacks 25 through 32 for the KX-TD1232. Installing two units allows 32 SLT’s to be connected to jacks 17 through 32 for the KX-TD1232.
Installing Expansion Unit (KX-TD174) Note: Section 2.4.4 “Installing Expansion Unit (KX-TD170/KX-TD180), • To fix the connector, refer to “ Amphenol 57 Type (screw-attach-type 50-pin connector) Connection for KX-TD170” in the main Installation Manual. • For jack connection, please see “Cable Pin Numbers to Be Connected” on the next page. †...
Installing Expansion Unit (KX-TD286) ISDN 6-S0 Line Unit Connection To add six ISDN S0 lines, use the optional ISDN 6-S0 Line Unit (KX-TD286). This unit can be installed in any of the expansion areas provided on the front of the main unit. When the KX-TD286 is installed in the KX-TD816, only four ISDN S0 lines are available for outside lines and the other ports are for extension lines (ISDN extensions).
Page 11
Installing Expansion Unit (KX-TD286) For unit installation, refer to the procedure “Installing Expansion Unit (KX-TD280)” in the main Added and Changed Features for Installation Manual and Programming Tables Vol. 1. Steps 1 through 5 and 8 through 11 of the installation procedure are the same as the KX-TD280.
Internal ISDN S0 Line Connection The ISDN S0 Bus on the KX-TD280 and the KX-TD286 can be used as internal S0 bus. Each port can be used as either external or internal ISDN S0 Lines. Some System Programs are required to use the S0 bus as internal ISDN S0 lines beforehand.
Page 13
Internal ISDN S0 Line Connection Maximum cabling distance of S0 bus connection The maximum length of the extension line cord that connects the main unit and the ISDN terminal equipment (TE) is shown below: Under 1000 m Point-to-Point Point-to-Multipoint TE 1 TE 8 Under 150 m Expansion Point-to-Multipoint...
Features SDN Extension Description The system supports terminal equipments with separate power supplies. For example, ISDN telephone, G4 Facsimile and personal computers which are connected to optional ISDN S0 Line Unit : KX-TD280 or KX-TD286. A maximum of eight terminal equipments can be connected to each ISDN S0 bus with point-to- multi-point configuration.
Features Connection References Section 2, Installation — in this manual Internal ISDN S0 Line Connection Programming References Section 4, System Programming, [012] ISDN Extension Number Set — in this manual [013] ISDN Extension Name Set — in this manual [014] Budget Management on ISDN Port — in this manual [109] Expansion Unit Type —...
Manager Programming ISDN Extension Number Set Description Assigns an extension number to each port which is connected to the ISDN S0 unit or card. Selection • Port number: KX-TD816—01 through 06 KX-TD1232—01 through 12 • Extension Number: 2 or 3 digits Default All ports –...
Page 17
Manager Programming ISDN Extension Number Set (contd.) • An extension number is invalid if the leading first or second digits disagree with the setting of the program [100] “Flexible Numbering, 1st through 16th hundred extension blocks.” If one digit is assigned as the leading digit, some extensions have two digits and some have three digits.
Manager Programming ISDN Extension Name Set Description Assigns names to the ISDN extension numbers programmed in program [012] “ISDN Extension Number Set.” Selection • Port number: KX-TD816—01 through 06 KX-TD1232—01 through 12 • Name: 10 characters (max.) Default All ports – Not stored Programming Enter 013.
Manager Programming Budget Management on ISDN Port Description Assigns the charge limitation of a call on the ISDN extension port basis. Selection • Port number: KX-TD816—01 through 06, KX-TD1232—01 through 12, =all ports) • Charge limitation (Charge): 0 through 59999 Default All ports –...
CO Line Programming ISDN Port Type Description Assigns the type of each port either CO line or extension line on ISDN port basis. Selection • Port number: KX-TD816—01 through 04, =all ports) KX-TD1232—01 through 12, =all ports) • CO (CO line) / Extension Default All ports –...
CO Line Programming ISDN Layer 1 Active Mode Description Assigns the active mode of Layer 1 on ISDN port basis. Selection • Port number: KX-TD816—01 through 06, =all ports) KX-TD1232—01 through 12, =all ports) • Permanent / Call Default • KX-TD816 Port 05 and 06– Call; other ports–permanent •...
CO Line Programming ISDN Configuration Description Assigns the configuration on ISDN port basis. This program is available for ISDN extension only. Selection • Port number: KX-TD816—01 through 06, =all ports) KX-TD1232—01 through 12, =all ports) • Point (point to point) / Multipoint (point to multipoint) Default •...
CO Line Programming ISDN Data Link Mode Description Assigns the data link mode on ISDN port basis. Selection • Port number: KX-TD816—01 through 06, =all ports) KX-TD1232—01 through 12, =all ports) • Permanent / Call Default • KX-TD816 Port 05 and 06– Call; other ports–Permanent •...
CO Line Programming ISDN TEI Mode Description Assigns the Terminal Endpoint Identifier (TEI) mode on ISDN port basis. Selection • Port number: KX-TD816—01 through 06, =all ports) KX-TD1232—01 through 12, =all ports) • Fix 0 through 63 / Automatic Default •...
CO Line Programming ISDN Extension Multiple Subscriber Number Description Selects whether the Multiple Subscriber Number is allocated to each terminal equipment on ISDN S0 bus or not on ISDN port basis. Selection • Port number: KX-TD816—01 through 06, =all ports) KX-TD1232—01 through 12, =all ports) •...
CO Line Programming ISDN Extension Progress Tone Description Enables or disables to send the progress tone to ISDN extension on ISDN port basis. Selection • Port number: KX-TD816—01 through 06, =all ports) KX-TD1232—01 through 12, =all ports) • Enable / Disable (no tone) Default All ports –...
Extension Programming Incoming Call Display Description Allows you to select between three display types when an incoming call is received. “Calling” means the incoming caller's telephone number is displayed. “Called” means the called telephone number is displayed. “Line Name” means the CO line name assigned in the [417] program is displayed.
Extension Programming ISDN Class of Service Description Programs a Class of Service (COS) number for each ISDN extension port. The COS determines the call handling abilities of each port. A primary and a secondary COS numbers can be assigned per port. Selection •...
Extension Programming 614-615 Outgoing Permitted CO Line Assignment – Day/Night for ISDN Extension Description Determines the CO lines which can be accessed by an ISDN extension in both day and night modes. The extension users can make outgoing outside calls using the assigned CO lines. Selection •...
614-615 Extension Programming Outgoing Permitted CO Line Assignment – Day/Night for ISDN Extension (contd.) • To assign all ports to one selection, press the key at step 3. In this case, the display shows the contents programmed for a first port. •...
ECTION OF THE EATURE ITLE EVISION ANUAL Module Expansion This feature has been changed to the new one. (Installation Manual) Section 3 See page 33. [105] • Location number is changed to “001 through 128.” (Installation Manual) Section 4 Account Codes •...
Features odule Expansion Description The KX-TD816 starts with 4 CO line and 8 extension jacks. The KX-TD1232 starts with 8 CO line and 16 extension jacks. They can be expanded by installing optional units. • An 8-Station Line Unit adds 8 extension jacks. •...