If the computer is connected to a docking device
3
(docked), undock it. See the documentation that
came with your docking device for instructions.
Disconnect the computer from the electrical
4
outlet.
Wait 10 to 20 seconds, and then disconnect any
5
attached devices.
Remove any installed PC Cards, batteries, and
6
module bay devices.
NOTICE: Handle components and cards by their edges,
and avoid touching pins and contacts. Ground yourself by
touching a metal connector on the back of the computer.
Continue to ground yourself periodically during this
procedure.
Turn the computer over.
7
Loosen the captive screw from the Mini PCI
8
card/modem cover, and remove the cover.
10
Installing and Configuring the Mini PCI Card