Table of Contents
Advertisement
Ports on the Right Panel
Port Type
Port Icon
Other ports
Connecting Cables
The following figure shows the recommended cable connections for DP300. You can also connect cables for DP300 based on
your actual needs.
Powering on the Endpoint
After all cables are connected, connect the endpoint to a power source and turn the power switch to ON. The following table
describes the indicator status of the power button on DP300.
Indicator Status
Blinking blue twice per second
Steady blue
Blinking blue once every 10 seconds
Blinking blue eight times per second
Description
USB port that connects to a USB device
3.5 mm microphone port
3.5 mm mixed audio port (OMTP-compliant
mixed port not supported)
Power switch
Description
The endpoint is being started.
The endpoint is running properly.
The endpoint is in sleep state.
The endpoint is being upgraded.
Application Scenario
Used to connect to a USB device, for example,
a portable hard disk.
Used for audio input.
Used for audio input and output.
Used to power on or off DP300.
5
Advertisement
Table of Contents
