Cisco TelePresence MX700 and MX800
Introduction
xConfiguration Audio MicrophoneReinforcement Gain
The gain (in dB) that will be applied to the mixed microphone signal that is fed to the selected
MicrophoneReinforcement outputs.
Requires user role: ADMIN, INTEGRATOR
Default value: -54
USAGE:
xConfiguration Audio MicrophoneReinforcement Gain:
where
Gain
: Integer (-54..15)
Use this gain to adjust the level of microphone signal that should be fed to the local
output. The value -54 means "Off", and no signal will be fed from the microphone to
the output.
xConfiguration Audio SoundsAndAlerts RingTone
Define which ringtone to use for incoming calls.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: Sunrise
USAGE:
xConfiguration Audio SoundsAndAlerts RingTone:
where
RingTone
: Sunrise/Mischief/Ripples/Reflections/Vibes/Delight/Evolve/Playful/Ascent/
Calculation/Mellow/Ringer
Select a ringtone from the list.
D15335.08 Cisco TelePresence MX700 and MX800 API Reference Guide CE9.2, NOVEMBER 2017.
About the API
xConfiguration
xConfiguration
Gain
RingTone
xCommand
xConfiguration Audio SoundsAndAlerts RingVolume
Define the ring volume for incoming calls.
Requires user role: ADMIN, INTEGRATOR, USER
Default value: 30
USAGE:
xConfiguration Audio SoundsAndAlerts RingVolume:
where
RingVolume
: Integer (0..100)
The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off.
xConfiguration Audio Input HDMI [n] Level
This setting applies to HDMI [2..3] for single camera systems, and to HDMI [3] for dual camera
systems.
Define the audio level of the HDMI input connector, in steps of 1 dB.
Requires user role: ADMIN, INTEGRATOR
Default value: 0
USAGE:
xConfiguration Audio Input HDMI
where
n
: Unique ID that identifies the HDMI input. Range: 2..3 for single camera systems; 3..3 for
dual camera systems
Level
: Integer (-24..0)
Select a value between -24 and 0, in steps of 1 dB.
44
API Reference Guide
xStatus
Appendices
RingVolume
n
Level:
Level
Copyright © 2017 Cisco Systems, Inc. All rights reserved.