Time Shift Recording Onto A Usb Storage Device - JVC LT-32C660 Instruction Manual

Time Shift Recording onto a USB Storage Device

This function allows you to pause live TV. The picture will pause and the programme will begin recording so you don't miss any of
the programme. You will have to have a USB storage device attached to the USB socket for Time Shift Recording to work.
• Time Shift Mode and Recording
functions may not work if the
signal strength is weak.
• Stop the time shift function
before switching to another
input source.
While watching your TV, you may press the
the bathroom / kitchen). " " will show on the screen.
When you have returned, press the
screen.
The video and sound may have a little bit of delay or be out-of-sync for a few seconds when the unit starts to playback the missed
programme. It will soon turn to normal.
1
2
3
Using the Remote Control
You can shift playback to any point of the virtually recorded programme.
or When playing,
• Press the
• During fast forward press the
When paused
• Press the
• During playback, press the
the
OK When timeshifting press the OK button to play or pause the recording.
If you want to exit timeshifting, press the
LT-32C660/661(A)_IB.indd 27
• If the transfer rate of the USB storage device is too slow for recording or
time shift function, a warning statement will be shown on the screen. If this
happens, please upgrade your USB storage device. The minimum transfer
speed is 5MB/s.
• You can only record TV that is being transmitted down your aerial. If you have
Sky or Virgin box connected via HDMI you won't be able to record from this.
button to pause the live programme if you want to go out for a while (e.g. going to
(PLAY) button to play the missed broadcast programme. "
4
button repeatedly to speed up - x 2 / x 4 / x 8 / x 16 / x 32.
(PLAY) button to return to normal playback.
button repeatedly to view in slow motion - x 1/4 / x 1/2 / x 1 (normal playback).
button to display a still screen and then press the
(PLAY) button to resume playback.
Using the Features
" will briefly show on the
The 'PVR Time Shift Progress Bar'
1 Indicates the status of the currently
displayed video (
2 Channel name being recorded.
3 Programme name being recorded.
4 Indicates the amount of time
recorded.
button.
5
/ / / )
button again or
27
06/09/2016 18:11