OPERATION MANUAL Superheated Steam Countertop Oven MODEL SSC0586DS CUSTOMER ASSISTANCE ......... 2 CONSUMER LIMITED WARRANTY ......3 IMPORTANT SAFEGUARDS ........4 INFORMATION YOU NEED TO KNOW ......5 PART NAMES ............6 CONTROL PANEL ............. 7 IMPORTANT INSTRUCTIONS ........8 BEFORE OPERATING ..........
DEALER TELEPHONE SERVICER TELEPHONE FOR US TO PHONE: CALL 1-800- BE-SHARP ( 237-4277 ) for : SERVICE (for your nearest Sharp Authorized Servicer) PARTS (for your authorized parts distributor) ADDITIONAL CUSTOMER INFORMATION TO WRITE: Sharp Electronics Corporation Customer Assistance Center...
(“Purchaserˮ) that this SHARP brand product (“Productˮ), when shipped in its original container and sold or distributed in the United States by Sharp or an authorized Sharp dealer or reseller, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the Purchaser for parts or labor for the period(s) set forth below.
Return the appliance to electric shock. the nearest SHARP AUTHORIZED Extreme caution should be exercised SERVICER for examination, repair, or when using containers constructed of adjustment.
8. Do not insert any objects in the steam outlets receptacle. or ventilation openings. A 3-prong adapter may be purchased and used 9. If the oven light fails, consult a SHARP temporarily if local codes allow. Follow package AUTHORIZED SERVICER. directions.
PART NAMES 1. Ventilation openings Be aware that hot steam or air comes out during cooking, and keep children away from the appliance. 2. Door open handle 3. LCD display 4. Control panel 5. Dial 6. Water tank (See page 8) 7.
CONTROL PANEL DISPLAY INFORMATION The display shows information including cooking time and cooking mode. Bake/Reheat Broil/Grill Toast: Toast mode is selected or in use. Pizza Warm: Warm mode is selected or in use. Warm ° Pizza: Pizza mode is selected or in use. Toast Bake/Reheat: This mode is selected or in use.
Do not drop or damage the water tank. Heat may cause the water tank to change shape. Do not use a damaged water tank. Call 1-800-BE-SHARP to purchase a replace- ment part. Do not block the air holes on the lid of the water...
BEFORE OPERATING Before operating the appliance, read and under- stand this operation manual completely. Before the appliance can be used, follow these steps: 1. Place the drip tray correctly. See page 8. 2. Plug in the appliance. A beep will sound and the display will show “Toast”.* 3.
COOKING - No preheat is required. There are five cooking modes. Refer to the “COOKING CHART”. The chart gives information on each setting. The appliance has seven color settings for Toast, and one temperature setting for Broil/Grill. Warm, Pizza and Bake/Reheat modes each have appropriate temperature ranges from 14 preset tempera- tures (160, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, 450, 475 and 485°F) Preheating is not necessary.
COOKING - No preheat is required. TIPS FOR COOKING BROIL/GRILL Fill the water tank with cold, filtered tap TO SET ACCESSORIES water to the MAX mark and install. Use the suitable accessory for each cooking mode. Place food on pan, and place in the oven. Broiling Pan Crisper Tray Close the door.
OTHER FEATURES EXTENDING COOKING TIME AT SOUND ON/OFF THE END OF COOKING You can mute the appliance. Cooking results may vary depending on room Sound ON/OFF function is available when the temperature, initial food temperature and other display shows any cooking mode indicator only. factors.
Make sure the soap is wiped off with a moist Do not use harsh cleaners, sharp metal scrapers cloth, and dry the exterior with a soft towel. or stiff brushes. Broiling Pan and Crisper Tray are dishwasher safe.
Upper position is recommended for most recipes. Refer to the provided Cookbook. If you still require service, disconnect the plug from the outlet and CONTACT YOUR NEAREST SHARP AUTHORIZED SERVICER. ERROR MODE Any time “C with any number” appears, the servicer should be called.
SPECIFICATIONS AC Line Voltage: Single phase 120V, 60Hz, AC only AC Power Required: 1750 W, 14.5 amps. Outside Dimensions: 19.7”(W) x 9.3”(H) x 19.3”(D) Cavity Dimensions: 13.8”(W) x 4.6”(H) x 14.0”(D) Cavity Volume: 0.5 Cu. Ft. Net Weight: Approx. 24.5 lb.(without accessories)
Page 16
® TINSEA010KRRZ-D71 SHARP ELECTRONICS CORPORATION Printed in Thailand 100 Paragon Drive, Suite #100, Montvale, NJ 07645...