Outbound Call Codec Selection Codes - Cisco 8851 Administration Manual

Outbound Call Codec Selection Codes

Parameter
Prefer G711u Code
Force G711u Code
Prefer G711a Code
Force G711a Code
Prefer G722 Code
Force G722 Code
Prefer G722.2 Code
Force G722.2 Code
Prefer G729a Code
Force G729a Code
Prefer iLBC Code
Force iLBC Code
Description
Makes this codec the preferred codec for the associated call.
Defaults to *017110.
Makes this codec the only codec that can be used for the
associated call.
Defaults to *027110.
Makes this codec the preferred codec for the associated call.
Defaults to *017111
Makes this codec the only codec that can be used for the
associated call.
Defaults to *027111.
Makes this codec the preferred codec for the associated call.
Defaults to *01722.
Only one G.722 call at a time is allowed. If a conference call
is placed, a SIP re-invite message is sent to switch the calls to
narrowband audio.
Makes this codec the only codec that can be used for the
associated call.
Defaults to *02722.
Only one G.722 call at a time is allowed. If a conference call
is placed, a SIP re-invite message is sent to switch the calls to
narrowband audio.
Makes this codec the preferred codec for the associated call.
Makes this codec the only codec that can be used for the
associated call.
Makes this codec the preferred codec for the associated call.
Defaults to *01729.
Makes this codec the only codec that can be used for the
associated call.
Defaults to *02729.
Makes this codec the preferred codec for the associated call.
Makes this codec the only codec that can be used for the
associated call.
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Cisco IP Phone Web Page
241