Interface Cable - Canon EOS 5D Mark IV Instruction Manual

Configuring Settings to Use Web Services
Start EOS Utility on the computer, log in to CANON iMAGE GATEWAY,
then configure the camera's settings to enable access to Web services.
For details, refer to the EOS Utility Instruction Manual. For how to
obtain the EOS Utility Instruction Manual, refer to the Camera
Instruction Manual.
The general procedure for sending images to a Web service is as
follows.
1
Install EOS Utility on a computer.
If you have already installed it, proceed to step 2.
2
Access Canon website from the computer and sign up
as a CANON iMAGE GATEWAY member (free of charge).
If you are already a member, proceed to step 3.
3
Connect the camera and computer with the provided

interface cable.

You can also configure the settings by connecting the camera and
computer via Wireless LAN (p.59) instead of an interface cable.
4
Start EOS Utility on the computer, log in to CANON
iMAGE GATEWAY, then configure the camera's settings
to enable access to Web services.
For details, refer to the EOS Utility Instruction Manual.
5
Disconnect the interface cable.
6
Connect the camera to a Wi-Fi access point (p.59).
7
Send images to a Web service registered on the camera
(p.129).
You can share images with your family and friends by sending
images from the camera to a Web service registered on the camera
or by sending Web links of the online albums.
Preparation for Web Services
57