Mounting The Piu On A Wall Using Screws - Motorola Piccolo-XR Owner's Manual

Before installing the PIU, verify that there is sufficient space
around the unit according to the specific installation.

Mounting the PIU On A Wall Using Screws

1. Secure two screws (not supplied) of maximum 0.37"
(9.5 mm) head size to the wall, 3.256" (82.7 mm) apart.
The wall-mounting template in Appendix D can be
used to determine the space between both screws.
2. The screws must not protrude from the wall surface by
more than 0.23" (6 mm) or by less than 0.16" (4 mm).
3. Attach the unit to the wall, fitting the two key hole
shaped cavities on the back cover of the unit over the
screws and sliding it down. (See Figure 5.)
Figure 5
PIU Installation– Screw Mount dimensions
3.26"
82.7 mm
Installation
9