Kenwood KTLD60X15 Installation Instructions Manual page 10

installation
9. Reverse the upper hinge and place it on
its new position. Fix the wire on the hinge.
Place the bottom hole of the door onto
the bottom hinge pin. Insert the upper
hinge pin into the upper hole of the door.
Tighten the pin securely. Screw the upper
hinge tightly.
Ensure the door is aligned horizontally
and vertically, so that the seals are
closed on all sides before finally
tightening the pin.
10. Plug the electrical cord. Cover the upper
hinge with the upper hinge cover.
11. Reverse the upper door corner block and
attach on the door. Put back the upper door
cover.
12. Move the magnet cord to the opposite side
and attach the corner cover. Put back the
upper cover.
13. Move the door handle to the other side of
the door accordingly.
10