Hints And Tips - Hitachi PDV342E Instruction Manual

Hints and Tips

If a problem does occur, it may often be due to something very minor. The following
table contains various tips.
Menu
No power.
The remote
control does not
function.
Very little or no
sound is coming
from a DVD.
No picture.
The picture is not
clear.
Loud hum or noise
is heard.
• Ensure the mains adapter is connected.
• Make sure that the unit is turned on.
• Make sure that you select ON mode.
• Make sure the battery is charged up on the DVD player.
• Use the remote control near the unit.
• Point the remote control at the remote sensor on the unit.
• Replace the battery in the remote control with a new one.
• Make sure the plastic sheet has been removed from the
remote control.
• Remove any obstacles between the remote control and the
unit.
• Make sure the unit is not paused. Press the PLAY/SEL. button
on the unit or the remote control.
• Make sure the unit is not in fast-forward or fast-reverse mode.
Press the PLAY/SEL. button on the unit or the remote control.
• Make sure the AUDIO/VIDEO input/output connections are
correct.
• This unit does not support DTS audio decoding system. Press
the button on the remote control to change the audio
setting to 2-Channel Analogue mode.
• The unit has overheated. Shut it off for 30 minutes to allow it
to cool down.
• The volume control is too low. Increase the volume.
• The region number of the disc doesn't match the region
number of this unit.
• Make sure the Back Light is set ON on the main unit.
• The DVD is dirty. Gently clean the disc.
• The disc is scratched.
• Please adjust the LCD's brightness, contrast and colour using
the LCD button on the unit or the remote control.
• Setup Video
• The plugs and sockets are dirty. Wipe them with a cloth
slightly moistened with alcohol.
• Clean the disc.
• The disc is scratched or the file is corrupt.
Description
Picture Mode User on Main unit.
GB
33