Sim Card; Inserting A Sim Card - NEC 535 Manual

SIM Card

Before using your wireless phone you must register with a wireless network service provider to receive a SIM (Subscriber Identity
Module). The SIM card contains a computer chip that stores and tracks your phone number, the services included in your
subscription, and your SIM phonebook information. It is stored in a recess in the battery compartment.
The phone can not be used (except for emergency calls) until a valid SIM is inserted. It is possible to transfer your SIM to another
compatible phone and access your network services.
If the SIM is already inserted, see Powering On the Phone, page 26.

Inserting a SIM Card

*
Make sure that the power is Off and remove the battery.
Release the battery lock in the direction of arrow (1). Lift the battery up in the direction of arrow (2) and remove it to reveal
the SIM location.
Place the straight end of SIM card with the metal part facing down.
Carefully move to slide the SIM card lock in the direction of arrow (3) and push the SIM card in the direction of arrow (4) to
place the SIM card under the lock. Make sure the SIM is fully inserted.
To replace the battery, place the bottom of the battery into position. Lower the battery until it clicks into place.
22