4.5
Important functions via BOP20
Description
The BOP20 can be used to execute the following functions (via parameters) that help you
handle your projects more efficiently:
● Restore the factory settings
● Copy from RAM to ROM
● Identification via LED
● Acknowledge error
Restore the factory settings
The factory setting of the complete device can be restored in the CU drive object.
● p0009 = 30
● p0976 = 1
Copy from RAM to ROM
In the CU drive object, you can save all your parameters to the non-volatile memory
(CompactFlash card):
● Press the "P" key for 3 seconds or
● p0977 = 1
Note
Parameter rejection with active identification
This parameter is not accepted if an identification routine (e.g. motor identification routine)
has been selected on a drive.
Basic Operator Panel 20 (BOP20)
Operating Instructions, 03/2013, A5E00809375A
Setting parameters with the BOP20
4.5 Important functions via BOP20
23