Time-Setting Options; Automatic Hotplate Switch-Off; Automatic Timer; Kitchen Timer - Bosch PKF6..FP series Instruction Manual

OTime-setting options
T here are 2 different time-setting options:
T i m e - s e t t i n g o p t i o n s
A hotplate should switch off automatically
■

Kitchen timer

■

Automatic hotplate switch-off

Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time
The hotplate must be selected and set.
Touch the symbol. The
0
1.
lights up. lights up on the timer display.
‹‹
Within the next 10 seconds, set the desired cooking
2.
time on the control panel.
The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cooking
time of the selected hotplate is always displayed.
When the time has elapsed
When the cooking time has elapsed, the hotplate
switches off. You will hear an audible signal and
lights up in the display for 10 seconds. The
lights up brightly. Touch any symbol. The displays go
out and the audible signal ceases.
Changing or cancelling the cooking time
Select the hotplate and touch the
display lights up brightly. Change the cooking time or
set to in the settings range.
‹‹
You can set a cooking time of up to 99 minutes.
Note:

Automatic timer

You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can find out how to switch on the automatic timer in
the Basic settings section.~ Page 10
You can change the cooking time for a hotplate
Note:
or switch off the automatic timer for the hotplates.
Select the hotplate and touch the
desired display lights up brightly. Change the
x
cooking time or set to
‹‹
display for the hotplate
x
‹‹
display
x
symbol. The
0
symbol. The
0
in the settings range.
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
If a hotplate has been selected, touch the
■
twice within 10 seconds.
If a hotplate has not been selected, touch the
■
symbol.
The V display lights up.
Setting the kitchen timer
Set the desired time in the control panel.
After the time has elapsed
After the time has elapsed, you will hear a beep.
lights up in the timer display. The
kitchen timer lights up brightly. The display switches off
after 10 seconds.
Displaying the time
Use the
0
is displayed for 10 seconds.
Setting the correct time
Use the
0
the time.
bAutomatic safety cut-out
I f a hotplate has been switched on for a long time
A u t o m a t i c s a f e t y c u t - o u t
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
x
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).

Time-setting options

V
symbol to select the kitchen timer. The time
symbol to select the kitchen timer and reset
and the
"‰
en
symbol
0
0
‹‹
display for the
/ residual
• œ
9