Show Commands
show cts credentials
To display the Cisco TrustSec device credentials configuration, use the show cts credentials command.
show cts credentials
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
Release
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to display the Cisco TrustSec credentials configuration:
switch# show cts credentials
CTS password is defined in keystore, device-id = Device1
Related Commands
Command
feature cts
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Cisco Nexus 7000 Series Security Command Reference
show cts credentials
735