Table of Contents
Advertisement
Quick Links
Programming Terminal Support System PS200
Operating Instructions
KXF-9R4C
Model No.
Programming Manual
(Line Converter)
Thank you for purchasing PS200, the programming terminal support system.
Before placing the machine in service, be sure to read the instruction manual for
proper usage.
After that, store it carefully and read it if necessary.
9R4C-E-LCBA-0006
Advertisement
Table of Contents
Related Manuals for Panasonic KXF-9R4C
Summary of Contents for Panasonic KXF-9R4C
- Page 1 Programming Terminal Support System PS200 Operating Instructions KXF-9R4C Model No. Programming Manual (Line Converter) Thank you for purchasing PS200, the programming terminal support system. Before placing the machine in service, be sure to read the instruction manual for proper usage.
- Page 3 The machine shall be operated by professional, specially trained operators. It shall not be operated by non-professional, not specially trained operators. For the training coursed you, make contact with Panasonic Factory Solutions Co., Ltd., PFAE or PIEL.” WARNING DO NOT ALLOW ANY PERSON WHO HAS NOT RECEIVED SPECIAL TRAINING TO OPERATE THE MACHINE.
- Page 4 PS200 User License Agreement This is the Agreement between the users and us related to Programming Terminal Support System PS200-G. The product includes the software of the computer, relative media, (CD ROM or FD, etc.), and the printed materials as instruction manuals. We regard user’s installation or use of this software as their approval of the restriction based on the terms and conditions of this Agreement.
- Page 5 The instruction manuals consist of Programming Manual (General Description) and Programming Manual (Line Converter). These manuals describe the operations, programming, detailed functions, routine maintenance, and much more. 9R4C-E-PMB00-A01-00...
-
Page 6: Organization Of Manuals
Organization of manuals Organization of instruction manuals This machine is accompanied with the following manuals. And, refer to the lower system PT200-G as the need arises. Manual type Explanation "PS200 OUTLINE" describes the whole outline of PS including the line Programming Manual converter. -
Page 7: About The Wording In Context
About the wording in context How to read operating instructions Description depends on the page; however, it is constructed basically as follows. Explanation Title Operation step number Actual operation Supplementary description Symbols used in this manual In this manual, the following symbols are used for description. : This shows the part to be clicked on. - Page 8 Note on the wording in the main body of the PS200-G line converter The PS200-G line converter and the PT200-G line converter are the same in each main body (chapter 1 and later). For this reason, the main body of the PS200-G line converter uses the wording “PT200”...
- Page 9 = MEMO = 9R4C-E-PMB00-A01-00...
- Page 10 TABLE OF CONTENTS SAFETY PRECAUTIONS ........1 1. OUTLINE OF LINE CONVERTER....1-1 1.1 Flow of Main Operations..................1-2 1.1.1 Preparing PT Files from CAD Data....................1-2 1.1.2 Converting Machine’s Production Data into PT Files..............1-4 1.1.3 Simulating Production of Virtual Line Prepared on PT..............1-5 1.1.4 Outputting Original PT100 Data to Actual Line as PT Files ............
- Page 11 4.4 Displaying Result ....................4-15 4.5 Trouble in Exporting....................4-16 5. FIXATION DATA ..........5-1 5.1 Fixation Data File List ...................5-2 5.1.1 Fixation Data File List Window....................... 5-2 5.1.2 Start and Exit of Fixation Data File List Window ................5-3 5.2 Feeder Fixation.....................5-4 5.2.1 Editing Feeder Fixation........................
- Page 12 7.2.4 How to Set Fixed Line (Fixed Length Support)................7-9 7.2.5 Saving Definition File and Exiting Editor ..................7-10 7.3 Loading Mode and Data Preparation Examples for Each Mode ......7-11 7.3.1 How to Set Loading Mode ......................7-11 7.3.2 Loading Mode and Data Type ..................... 7-11 7.3.3 Data Preparation Examples for Each Loading Mode..............
-
Page 13: Safety Precautions
SAFETY PRECAUTIONS Be sure to observe The precautions that shall be observed in order to prevent an injury to the user or the other persons, and damage to property, are described as follows. ! The degrees of danger or injury, resulting from incorrect usage owing to failure to read an indication, are classified and described as follows. - Page 14 WARNING Page 2 9R4C-E-PMB00-A03-00...
- Page 15 CAUTION Page 3 9R4C-E-PMB00-A03-00...
-
Page 16: Terms Used In This Manual
Terms used in this manual The terms used in this manual are used as the following meanings. This part describes only the terms frequently used. This manual is intended for those who are familiar with the basic operations of Windows, so it does not explain computer terms (“folder,”... - Page 17 Data file Group (Group folder) This is a folder used to manage data. To manage data for each production board type, such as a portable telephone group and an electronic device group, create the group folders. Lot (Lot folder) This is a folder used to manage the data for each production board. Lot includes all the data (PT files) of the machine or module on the production line.
- Page 18 Function Library This is an in-depth data aggregate prepared beforehand. Users can add and edit the data. PT has various kinds of libraries, such as for parts, for nozzles, and for feeders; you can input an in-depth data just by selecting data from the library at the data input screen. PS refers to the libraries of PT targeted for operation, and carries out various operations.