2.3.2
Configure BMC IP source static IP
1.
Insert the support CD into the optical drive.
2.
Restart the remote server then press <Del> during POST to enter the BIOS setup.
3.
Go to Boot menu and set the Boot Device Priority item to [CD-ROM].
4.
When finished, press <F10> to save your changes and exit the BIOS setup.
5.
On reboot, select Configure BMC IP Source Static IP for Shared LAN (or DM_LAN1)
from the main menu and press <Enter> to enter the sub-menu.
FreeDOS command prompt
Configure BMC IP Source Static IP for Shared LAN
Configure BMC IP Source DHCP IP for Shared LAN
Configure BMC IP Source Static IP for DM_LAN1
Configure BMC IP Source DHCP IP for DM_LAN1
ASMB9 Firnware Update for Preserve Configuration (SDR, LAN, Username)
ASMB9 Firnware Update for Clear Configuration (SDR, LAN, Username)
6.
Select <Yes> from the confirmation window.
WARNING !!!
CONFIGURE BMC IP Source STATIC IP NOW !
DO YOU WANT TO CONTINUE ?
7.
Wait for the configuration to finish. When done, press any key to continue.
Detect: MotherBoard
Detect: KCS Interface
New BMC IP Source : Static IP
Press any key to continue . . . _
8.
Go to BIOS menu to set the IP. For more information, refer to the 2.5.2 BMC network
configuration menu section.
2-4
ASUS Server Z11PP-D24 Series System
- > (Z11PP-D24 Series)
No
Yes
Chapter 2: Hardware Information