Table of Contents
Advertisement
4-5. Wear-resistant Tail Cover
The CB holder is completely covered with the round-edge tail cover. Thanks to the new shape, the CB holder is
wear-resistant even if making a three-point rest at the side handle, handle and the tail portion.
5. SPECIFICATIONS
Item
Capacity
Screw diameter of the spindle
Insulation method
Power source
Type of motor
Type of switch
Voltage, current and power
input
No-load rotation speed
Maximum output
Enclosure
Catalog
Actual
Packaging
Standard accessories
* Net weight excludes cord, rubber pad, sanding disc, washer nut and side handle.
Model
Workpiece: Housing .............. Glassfiber reinforced polyamide resin (black)
Painting:
Net*
Net*
Gross
Rubber pad 180 mm (7") ............... 1
Side handle ................................... 1
Wrench .......................................... 1
Washer nut .................................... 1
Air cover ........................................ 1
Sanding disc 180 mm (7") ............. 1
S 18SB
180 mm (7")
U. S. A., Canada: 5/8-11 UNC
Europe: M14 x 2
Other countries: M16 x 2
Double insulation
AC single phase 50 or 60 Hz
Single-phase series commutator motor
Trigger switch
Voltage (V) Current (A)
110
120
220
230
240
4,500/min.
Handle cover ...... Glassfiber reinforced polyamide resin (black)
Grip cover .......... Glassfiber reinforced polycarbonate resin (black)
and elastomer resin (green)
Tail cover ............ Glassfiber reinforced polyamide resin (green)
Gear cover and inner cover .......... Aluminum alloy die casting
Gear cover and inner cover .......... Gunmetallic color
2.0 kg (4.4 lbs.)
2.17 kg (4.9 lbs.)
3.4 kg (7.5 lbs.)
Corrugated cardboard box
--- 3 ---
S 15SB
150 mm (6")
Power input (W)
6.7
6.2
705
3.3
3.2
3.1
900 W
Rubber pad 150 mm (6") ............. 1
Side handle ................................. 1
Wrench ........................................ 1
Washer nut .................................. 1
Air cover ...................................... 1
Advertisement
Table of Contents
