Table of Contents
Advertisement
Getting Started
22
Function modes
2
Plug the USB cable into the USB 3.0 Host port on the Canvio
AeroCast
3
Plug the AC adapter into a live electrical wall outlet.
While charging, the battery indicator light will blink slowly
(interval time is 2 seconds).
Function modes
There are two available function modes on the Canvio AeroCast
can either connect to it directly with the included USB cable (DAS
mode) or connect wirelessly (Wireless LAN mode).
DAS mode (Direct-Attached Storage)
To operate via DAS mode, connect the Canvio AeroCast
computer's USB port using the included USB cable.
For Mac users:
To write files in DAS mode, you will need to install the "NTFS driver for
Mac" to your Mac. Refer the pre-loaded manual stored on the Canvio
AeroCast's HDD.
USB 3.0 Port
(Sample Image) Canvio AeroCast
To connect the Canvio AeroCast
1
Make sure the Canvio AeroCast
2
Connect the included USB 3.0 cable to the Canvio
AeroCast
3
Connect the other end of the USB 3.0 cable to your
computer's USB port.
You can now begin transferring data to and from the product.
™
.
USB cable
™
.
USB port
™
DAS mode
™
to your computer:
™
is powered OFF.
™
. You
™
to the
Advertisement
Table of Contents
