Catalogue Product Features / HW Spec--------------------------------------- 1 Product Features / HW Spec........1-1 Product six view and description-----------------------------------2 .
Disassembly and Assembly ........7-1 Required tools and screws screwdriver,thermostat soldering .
Page 10
Now appears at the bottom of the cover after the opening, but along the opening respectively under cover on both sides of card hook, one by one, gently pull outward, after being left and right card hook out of the open, under the cover can be removed easily.
Page 11
Remove the camera module, and then the battery will be removed Remov e camera Remov e Mic rubber Demolition of TP, electric blower first transferred to the 50 to 60 °, and then heating around the perimeter of TP, heated to can use the small iron move after TP, then put the box before the two horns in a downward direction pressure, clamp products, as a fulcrum, to touch the cock, and then use the card to the opening, remove along the whole week Demolition of LCD, before the first pull lower left corner, at the bottom of the card hook out of the open LCD again from two side of the card hook will be removed, remove the LCD...
Page 12
Here are all the components images In accordance with the method of dismantling reverse installation is complete 7-3 Assembly...
Diagnostic Tool SOP For tablets with SD card first, and then to tablet with cable connected computers, WINXP system need to install the driver (tablet computers connected to the computer, directly to the USB device mode option there is install the driver option), do not need to install Windows 7 system, then open the device, copy all the files to the root directory of the SD card, and then click , If prompted to ban installation tips, direct access to Settings - security - unknown source, directly on the check, and then install good...