Sony RCD-W7V Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. CD Player
  5. RCD-W7V
  6. Service manual
Sony RCD-W7V Service Manual

Sony RCD-W7V Service Manual

Compact disc recorder, us model, ver 1.2 2002.09
Hide thumbs Also See for RCD-W7V:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Ver 1.2 2002.09
DECK A (the CD/DVD player section)
System
Laser
Signal format system
Playable discs
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Wow and flutter
Outputs
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
(Phono jacks)
DECK B (the CD-R and CD-RW recording section)
System
Laser
Playable discs
Frequency response
Sony Corporation
9-873-470-03
Home Audio Company
2002I0200-1
Published by Sony Engineering Corporation
© 2002.09
SPECIFICATIONS
CD/DVD player
Semiconductor laser
NTSC
DVD, CD, CD-R/CD-RW
(for music use), MP3 disc
DVD (PCM 96 kHz):
20 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz):
20 Hz to 22 kHz (±0.5 dB)
CD: 20 Hz to 20 kHz
(±0.5 dB)
More than 100dB
(ANALOG OUT connectors only)
Less than 0.015%
More than 95 dB (DVD)
More than 95 dB (CD)
Less than detected value
(±0.001% W PEAK)
1.0 Vp-p 75 ohms,
sync negative
Luminance signal:
1.0 Vp-p, 75 ohms
C: 0.3 Vp-p, 75 ohms
Y: 1.0 Vp-p, 75 ohms,
sync negative
C
/B-Y, C
/R-Y:
B
R
0.7 Vp-p, 75 ohms
Compact disc digital audio system
Semiconductor laser
CD, CD-R, CD-RW (for music use)
20 Hz to 20,000 Hz (±0.5 dB)
RCD-W7V
Model Name Using Similar Machanism RCD-W1
CD-R
CD Mechanism Type
Optical Pick-up Type
Model Name Using Similar Mechanism NEW
CD/DVD
CD/DVD Mechanism Type
Signal-to-noise ratio
Dynamic range
Input
ANALOG IN (Phono jacks)
DIGITAL OPTICAL IN
(Square optical connector jack)
Outputs
ANALOG OUT (Phono jacks) Impedance 47 kilohms, Rated input
DIGITAL OPTICAL OUT
(Square optical connector jack)
PHONES (Phone jacks)
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Supplied accessories
• Video cord (1)
• Audio cords (2)
• Remote commander (remote) RM-R70 (1)
• R6 (size AA) batteries (2)
Design and specifications are subject to change without notice.
COMPACT DISC RECORDER
US Model
CDM-700(CD-RW)
KRS-220C
DP-4RM
Over 100 dB during playback
More than 95 dB during playback
Impedance 47 kilohms,
Rated input 330 mVrms
Optical wavelength 660 nm
2 Vrms
Load impedance over 10 kilohms
Wavelength 660 nm
Output level -18 dBm
28 mW, 32 ohms
120 V AC, 60 Hz
25W (120 V AC)
430 x 107.5 x 370 mm (w/h/d) incl.
projecting parts
5.1 kg

Advertisement

Table of Contents
loading

Related Manuals for Sony RCD-W7V

Summary of Contents for Sony RCD-W7V

  • Page 1 Compact disc digital audio system Laser Semiconductor laser COMPACT DISC RECORDER Playable discs CD, CD-R, CD-RW (for music use) Frequency response 20 Hz to 20,000 Hz (±0.5 dB) Sony Corporation 9-873-470-03 Home Audio Company 2002I0200-1 Published by Sony Engineering Corporation © 2002.09...
  • Page 2 COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 3: Table Of Contents

    RCD-W7V ERROR MESSAGE TABLE OF CONTENTS The following table explains the error 1. SERVICING NOTE ............4 messages that appear in the display. 2. GENERAL ................8 CHECK DISC , A record-related button has been pressed 3. DISASSEMBLY when a finalized disc is in the DECK B.

  • Page 4: Servicing Note

    RCD-W7V SECTION 1 SERVICING NOTE NOTES REGARDING HANDLING OF THE PICK-UP 1. Notes for transport and storage 1) The pick-up should always be left in its conductive bag until immediately prior to use. 2) The pick-up should never be subjected to external pressure or impact.
  • Page 5 RCD-W7V NOTES REGARDING COMPACT DISC PLAYER REPAIRS 1. Preparations 1) Compact disc players incorporate a great many ICs as well as the pick-up (laser diode). These compo- nents are sensitive to, and easily affected by, static electricity. If such static is high voltage, components can be damaged, and for that reason components should be handled with care.
  • Page 6 RCD-W7V Electrostatically Sensitive Devices (ESD) Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components com- monly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated cir- cuits and some field-effect transistors and semiconductor chip components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity.
  • Page 7 RCD-W7V NOTE ON CHECKING POWER SUPPLY CIRCUIT 4. When check the primary part, after remove power cord and dis 1. When check the primary part, you must remove the GND pin of charge the primary capacitor, and then check the system.

  • Page 8: General

    RCD-W7V SECTION 2 This section is extracted from GENERAL instruction manual. Front Panel 30 29 28 27 26 25 24 23 20 19 18 17 16 15 14 13 INPUT select (48) POWER switch (23) TIME (50) (open/close)-Deck A (23)

  • Page 9: Disassembly

    RCD-W7V SECTION 3 DISASSEMBLY Note: Disassemble the unit in the order as shown below. Top case Tray door, Front panel assy Back panel HP board, FL board, VOL board Audio board Power board DVD deck assy (deck A) BD board (deck A)

  • Page 10: Tray Door, Front Panel Assy

    RCD-W7V 3-2. TRAY DOOR, FRONT PANEL ASSY Insert a screwdriver to the square hole on the bottom, and slide the white lever in the arrow A direction to open the tray. Then remove the tray door. (In the case of DECK B, remove it in the same manner.)

  • Page 11: Back Panel

    RCD-W7V 3-4. BACK PANEL 3 Cord power 5 Back panel 1 Four screws (3X10) Two screws (3X8 BK) 3-5. AUDIO BOARD 3 Connector (CN103) Wire (flat type) (PN501) 4 Two screws (special) 1 Connector (PN3401) 5 Two screws (special) 6 AUDIO board...

  • Page 12: Power Board

    RCD-W7V 3-6. POWER BOARD 2 Two screws (special) Two screws (special) 1 Connector (CN4012) 4 PWB holder 6 POWER board 3-7. DVD DECK ASSY (DECK A), CD-R DECK ASSY (DECK B) 2 Two screws (special) 3 Two screws (special) 1 Wire (flat type)(PN3402)

  • Page 13: Bd Board (Deck A)

    RCD-W7V 3-8. BD BOARD (DECK A) 1 Three claws 2 Wire (flat type) (PMD02) 3 Wire (flat type) (PMD03) BD board 3-9. SLED BASE ASSY (DECK A) 1 Screw (1.7X6) 3 Clamp holder assy 4 Push out the disc tray by pushing the 7 Two screws Two screws (D2.0X6)

  • Page 14: 3-10.Cd-R Board (Deck B)

    RCD-W7V 3-10. CD-R BOARD (DECK B) 1 Three claws 3 Wire (fiat type) (PN301) 4 Wire (fiat type) (PN303) 2 Connector (PN302) BD-R board 5 Wire (flat type) (PN304) 3-11. PU MECHANISM ASSY (DECK B) 4 Clamp holder assy 1 Screw (2X6) 5 Push out the disc tray by pushing the Two screws (2.0X10)

  • Page 15: Test Mode

    TEST MODE 4-1. MICROCOMPUTER VERSION DISPLAY Setting Procedure 1. Connect a monitor to the “VIDEO OUT” terminal on RCD-W7V. 2. Insert the DVD disc to DVD player side (deck A). 3. Press x (DVD) button to stop the disc rotating.

  • Page 16: Electrical Adjustment

    RCD-W7V SECTION 5 ELECTRICAL ADJUSTMENT DVD MD Skew Adjustment Equipments to be required: • TV monitor (With RCA pin jack inputs) • Adjustment disc (CDR1/CDR2) (See page 6) • Test disc (0.8mm off-centered disc) TDV-534C (J-2501-222-A) • L-Wrench (3mm) (Impossible to use an inch size) Adjustment Procedure: 1.
  • Page 17 Start up Procedure: 1. Connect the PC connection jig with the RS-232C cable between the test connector (PN105) on CD-R of RCD-W7V and COM port on PC.(Check SW501 on the PC connection jig to “D” side.) 2. Turn power on RCD-W7V.
  • Page 18 RCD-W7V CD-R LD Setting Check (VRDC/VWDC/FPD Level Value Check) This routine is for checking performances of the record/playback D-A converter (IC409), RFIC (IC413), the encoder/decoder IC (IC401), CPLD (IC601), the optical pick-up block (KRS-220C), the microcomputer(IC701) and so on. It diagnoses malfunctions of interface, the pick-up or so on.
  • Page 19 RCD-W7V Description of each parameter VRDC: Used on the Read Power setting in case of reading CD-RW and CD-R. (DAC value on 100mW.) VWDC: There is VWDC1 (Write power) pin in the optical pick-up block. The recording power is set by it and VWDC2 (Over drive) pin.
  • Page 20 RCD-W7V Procedure : SERVO Check 1. Connect oscilloscope to TP4B3 (IC4B2 1 pin) and IC4B2 1 DVD SECTION pin. 2. Turned Power switch on. Note : 3. Load a disc (HLX-503) and playback the number one track. 1. DVD Block is basically designed to operate without adjustment.
  • Page 21 RCD-W7V Adjustment Location: CD-R SECTION [BD-R BOARD] (SIDE B) Note : 1. CD Block is basically designed to operate without adjustment. Therefore, check each item in order given. 2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated. 3. Use an oscilloscope with more than 10MΩ impedance.

  • Page 22: Diagrams

    RCD-W7V SECTION 6 DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) • Signal path. : DVD : CD For schematic diagrams. c : CD (digital)

  • Page 23: Circuit Boards Location

    RCD-W7V – BD-R SECTION – 6-1. CIRCUIT BOARDS LOCATION POWER board IC301 ia (RRF IN) IC502 qs (ILRCK) IC501 t; (MCLK IN) BD board 3.2 Vp-p 3.3 Vp-p 0.8 Vp-p HP board 21 µ sec AUDIO board 1V/div 1V/div 30nsec 0.2V/div...

  • Page 24: Block Diagrams - Overall Section

    RCD-W7V 6-2. BLOCK DIAGRAMS – OVERALL SECTION – IC202 IC7V2 CD-RW SECTION AD_MCK,LRCK,BCK DRAM IC702 IC501 LY702 RELAY Analog IN AD_DATA IC301 ASIC VC01S05 IC201 CDR D-OUT CXA3558 OTI9790 OPT_ IN BITCK Optical IN LRCK DATA X201 20MHz TO P/U...

  • Page 25: Block Diagrams - Cd/Dvd Section

    RCD-W7V – CD/DVD SECTION – DISC DVD_LDQM, DVD_SD,CS1 IC4A3 RFRP, RFCen GM72V161621 TE, Vref DVD_MA[0:11] MIRR,TZC IC411 1M x 16bit DRAM IC4B1 SDRAM DVD_MD[0:15] 256K x 16bit DVD: A,B,C,D, TA33P3721 DVD; RF DP-4RM FE,TE, RFRP, SBADD, DVD/CD RF CD: A,B, E, F...

  • Page 26: Block Diagrams - Cd-Rw Section

    CD - Decode Equalizer Serial to Parallel DATA ALPC ATIP CLV Control Pick-up Data conversion Focus Error ATAPI I/F (KRS-220C : Sony) Tracking Error Wobble Detect Digital Servo Processor Sled Focus Servo motor D -OUT Tracking Servo D- OUT Sled Servo...

  • Page 27: Block Diagrams - I/O Section

    RCD-W7V – I/O SECTION – IC704 IC707 NJM5532 NJM4556 MCLK(DVD,RW) FRONT R_CHANNEL VR903 BICL(DVD,RW) HP_R(3) IC7V1 DATA(DVD,RW) AK4382 L_CHANNEL HP_L(1) (DAC) LRCK(DVD,RW) H/P OUT LEVEL_SEL 7( L) IC703 ANALOG OUTPUT(L/R) 6(R) 4( L) 5( R) 4W53 LY702` LEVEL SELECT 6( R)

  • Page 28: Block Diagrams - Power Section

    RCD-W7V – POWER SECTION – Front RECTIFIER Front D120,C115, D107,C121 - 30 VA Front REG(-8V) RECTIFIER 9 VA L105 IC106 D108,C119 C131 12 V REG(8V) IC107 REG(9V) RECTIFIER IC109 L109 D110,C126 C127 REG(8V) IC108 5.2 VA I/O,DVD RECTIFIER 5.2 VD...

  • Page 29: Schematic Diagram - Bd Section (1/5)

    RCD-W7V 6-3.SCHEMATIC DIAGRAM -BD SECTION (1/5)-...

  • Page 30: Schematic Diagram - Bd Section (2/5)

    RCD-W7V 6-4.SCHEMATIC DIAGRAM -BD SECTION (2/5)-...

  • Page 31: Schematic Diagram - Bd Section (3/5)

    RCD-W7V 6-5.SCHEMATIC DIAGRAM -BD SECTION (3/5)-...

  • Page 32: Schematic Diagram - Bd Section (4/5)

    RCD-W7V 6-6.SCHEMATIC DIAGRAM -BD SECTION (4/5)- • See page 48 for IC Pin Function Description.

  • Page 33: Schematic Diagram - Bd Section (5/5)

    RCD-W7V 6-7.SCHEMATIC DIAGRAM -BD SECTION (5/5)- • See page 50 for IC Pin Function Description.

  • Page 34: Printed Wiring Board - Bd Section (Side A)

    RCD-W7V 6-8.PRINTED WIRING BOARD -BD SECTION - • See page 23 for Circuit Board location. BOARD BD BOARD (SIDE A) (Page44) • Semiconductor Location Ref. No. Location D4B1 IC403 IC404 IC405 IC406 IC407 IC409 IC411 IC413 IC4A2 IC4A3 IC4B3 POWER...

  • Page 35: Printed Wiring Board - Bd Section (Side B)

    RCD-W7V BD BOARD (SIDE B) • Semiconductor Location Ref. No. Location D4B2 IC401 R420 IC402 R443 IC408 IC410 C410 IC414 IC4A1 R749 IC4A4 R475 C453 IC4B1 C430 IC4B2 R494 R493 L4C2 R477 R4J0 R476 IC4B2 Q4B2 R4J9 C456 C457 C4J5...

  • Page 36: Schematic Diagram - Bd-R Section (1/4)

    RCD-W7V 6-9.SCHEMATIC DIAGRAM -BD-R SECTION (1/4)-...

  • Page 37: Schematic Diagram - Bd-R Section (2/4)

    RCD-W7V 6-10.SCHEMATIC DIAGRAM -BD-R SECTION (2/4)-...

  • Page 38: Schematic Diagram - Bd-R Section (3/4)

    RCD-W7V 6-11.SCHEMATIC DIAGRAM -BD-R SECTION (3/4)- • See page 51, 53 for IC Pin Function Description.

  • Page 39: Schematic Diagram - Bd-R Section (4/4)

    RCD-W7V 6-12.SCHEMATIC DIAGRAM -BD-R SECTION (4/4)-...

  • Page 40: Printed Wiring Board - Bd-R Section (Side A)

    RCD-W7V 6-13.PRINTED WIRING BOARD -BD-R SECTION- • See page 23 for Circuit Board location. M301 BD–R BOARD (SIDE A) SLED MOTOR • Semiconductor Location Ref. No. Location D301 IC201 IC207 IC208 IC304 IC305 IC306 IC307 IC308 IC503 IC504 Q301 Q302...

  • Page 41: Printed Wiring Board - Bd-R Section (Side B)

    RCD-W7V BD–R BOARD (SIDE B) • Semiconductor Location Ref. No. Location IC202 IC203 IC210 IC301 IC302 CHECK IC303 IC501 IC502 Q303 M609 LOADING MOTOR...

  • Page 42: Printed Wiring Board - Audio Section

    RCD-W7V 6-14.PRINTED WIRING BOARD -AUDIO SECTION- • See page 23 for Circuit Board location. POWER BOARD • Semiconductor (Page47) AUDIO BOARD (SIDE A) AUDIO BOARD (SIDE B) Location Ref. No. Location IC702 C756 IC703 IC704 C757 R745 IC706 IC707 R746...

  • Page 43: Schematic Diagram - Audio Section

    RCD-W7V 6-15.SCHEMATIC DIAGRAM -AUDIO SECTION -...

  • Page 44: Printed Wiring Board - Display Section

    RCD-W7V 6-16.PRINTED WIRING BOARD -DISPLAY SECTION- • See page 23 for Circuit Board location. BOARD (Page34) FL BOARD Q902 CN903 B C E CN9013 R981 SW951 SW955 SW954 SW905 SW906 LD903 LD901 C917 > > > > CD-R X901 LD904...

  • Page 45: Schematic Diagram - Display Section

    RCD-W7V 6-17.SCHEMATIC DIAGRAM -DISPLAY SECTION -...

  • Page 46: Schematic Diagram - Power Section

    RCD-W7V 6-18.SCHEMATIC DIAGRAM -POWER SECTION-...

  • Page 47: Printed Wiring Board - Power Section

    RCD-W7V 6-19.PRINTED WIRING BOARD -POWER SECTION- • See page 23 for Circuit Board location. BD–R AUDIO BOARD BOARD POWER BOARD (Page40) (Page42) • Semiconductor Location Ref. No. Location CN103 PN104 BD101 D101 C120 IC109 D102 D106 IC108 D107 D108 C137...

  • Page 48: Ic Pin Functions

    RCD-W7V 6-20. IC PIN FUNCTION DESCRIPTION • IC401 HD6417034AF DVD SYSTEM CONTROL (BD BOARD (4/5)) Pin No. Pin Name Description DAV_DATA6 MPEG data (bit 6) input DSP_INT Interrupt signal input from DSP — Ground 4 to 11 HD0 to 7 Data input/output to SRAM —...
  • Page 49 RCD-W7V Pin No. Pin Name Description Mode signal input (connected to VCC) Mode signal input (connected to ground) Mode signal input (connected to ground) — Power supply (+3.3V) — Power supply (+3.3V) AVCC — Power supply (+3.3V) AVREF ADC reference voltage input (connected to VCC)
  • Page 50 RCD-W7V • IC406 HS602002 (CPLD) (BD BOARD (5/5)) Pin No. Pin Name Description 16:09 Not used Not used MPEG_RST Reset signal output to ZIVA_4.1 — Ground — Not Used LEVEL_SEL FLD audio level meter L/R select signal output MPEG_CS Latch signal output to ZIVA_4.1...
  • Page 51 RCD-W7V • IC203 HD64F3062 (SYSTEM CONTROL) (BD-R BOARD (3/4)) Pin No. Pin Name Description Not used (Connected to ground through capacitor) ATIP/EFM# ATIP/EFM signal output to CST0100C /DA_RCS Chipselect signal output to VC01S05 /UCS1 Mode set signal output to OTI-9790CE...
  • Page 52 RCD-W7V Pin No. Description Pin Name Non maskable interrupt (connected to ground ) Ground — EXTAL Crystal oscillator input (20MHz) XTAL Crystal oscillator output (20MHz) Power supply — Not used /URD µ-COM data read signal output /UWR µ-COM data write signal output...
  • Page 53 RCD-W7V • IC207 CST0100C (LPLD) (BD-R BOARD (3/4)) Pin No. Pin Name Description — Not used RESAMP2 Timing signal input for OTI9790 WFPDSH Sample & hold signal of CXA3558R — Ground RFPDSH Sample & hold signal of CXA3558R WBLSH Sample pulse input for CXA3558R...

  • Page 54: Ic Block Diagrams

    RCD-W7V 6-21. IC BLOCK DIAGRAMS IC201 OTI-9790CE (BD-R board)
  • Page 55 RCD-W7V IC502 CS8420-CSR (BD-R board) CONTROL SDA/CDOUT SCL/CCLK PORT & ADO/CS REGISTER IDO/CDIN E MPH C&U BUFFER DATA DECORD/ VA + VD + ENCORD AGND DGND AES3 DECORD/ FILT OMCK ENCORD RMCK RERR SDOUT ILRCKD OLRCK OSCLK ISCLK SAMPLE TCBI...

  • Page 56: Exploded Views

    RCD-W7V SECTION 7 Ver 1.2 2002.09 EXPLODED VIEWS NOTE: • Hardware (# mark) list and accessories and pack- • -XX, -X mean standardized parts, so they may have When indicating parts by reference number, ing materials are given in the last of this parts list.

  • Page 57: Chassis Section

    RCD-W7V 7-2. CHASSIS SECTION The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. F101 PT101 Deck A (DP-4RM) Deck B (CDM-700(CD-RW)) Ref. No. Part No. Description Remark Ref.

  • Page 58: Dvd Play Section (Deck A) (Dp-4Rm)

    RCD-W7V 7-3. DVD PLAY SECTION (DECK A) (DP-4RM) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4735-923-A DECK ASSY (DVD) 4-241-339-01 PLATE, CLAMP 4-241-358-01 BASE ASSY, MAIN 4-241-344-01 FRAME, UP/D (MULTI) 4-241-340-01 MAGNET, CLAMP 4-241-354-01 SCREW, (D2.0X6) 4-241-341-01 CLAMP, UPPER 4-241-355-01 SCREW, DRAWING (D2.0X6)

  • Page 59: Cd Record Section (Deck B) (Cdm-700(Cd-Rw))

    RCD-W7V 7-4. CD RECORD SECTION (DECK B) (CDM-700(CD-RW)) supplied supplied supplied M609 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4735-925-A DECK ASSY (CDR) 4-241-166-01 HOLDER ASSY, CLAMP 4-241-164-01 MECHANISM ASSY, LOADING 4-241-167-01 CLAMP ASSY, DISC...

  • Page 60: Electrical Parts List

    RCD-W7V SECTION 8 AUDIO ELECTRICAL PARTS LIST Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Note: • SEMICONDUCTORS • Due to standardization, replacements in the parts list The components identified by In each case, u: µ , for example:...
  • Page 61 RCD-W7V AUDIO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JK705 8-749-017-80 IC GP1FA551TZ (DIGITAL OPTICAL OUT) R737 1-216-049-11 RES-CHIP 1/10W R738 1-216-057-00 METAL CHIP 2.2K 1/10W < COIL > R740 1-216-049-11 RES-CHIP 1/10W R741 1-216-079-00 METAL CHIP...
  • Page 62 RCD-W7V AUDIO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R7V2 1-216-037-00 METAL CHIP 1/10W C450 1-124-779-00 ELECT CHIP 10uF R7V3 1-216-037-00 METAL CHIP 1/10W C451 1-131-992-11 CERAMIC CHIP 100000PF R7V4 1-216-065-91 RES-CHIP 4.7K 1/10W C452...
  • Page 63 RCD-W7V Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C4D9 1-131-992-11 CERAMIC CHIP 100000PF C4M3 1-162-970-11 CERAMIC CHIP 0.01uF C4E0 1-131-992-11 CERAMIC CHIP 100000PF C4M4 1-124-779-00 ELECT CHIP 10uF C4E1 1-131-992-11 CERAMIC CHIP 100000PF C4M5 1-131-992-11 CERAMIC CHIP...
  • Page 64 RCD-W7V Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark PMD03 1-794-425-11 CONNECTOR, FCC/FPC 20P R453 1-216-809-11 METAL CHIP 1/16W PN3402 1-784-386-21 CONNECTOR, FFC/FPC 30P R454 1-216-809-11 METAL CHIP 1/16W PN4013 1-784-378-21 CONNECTOR, FFC/FPC 20P R455 1-216-809-11 METAL CHIP...
  • Page 65 RCD-W7V BD-R Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R4C5 1-216-803-11 METAL CHIP 1/16W R4K7 1-216-840-11 METAL CHIP 1/16W R4C6 1-216-803-11 METAL CHIP 1/16W R4K8 1-216-840-11 METAL CHIP 1/16W R4C7 1-216-803-11 METAL CHIP 1/16W R4K9...
  • Page 66 RCD-W7V BD-R Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C215 1-131-992-11 CERAMIC CHIP 100000PF C319 1-162-959-11 CERAMIC CHIP 330PF C216 1-162-964-11 CERAMIC CHIP 0.001uF C320 1-131-992-11 CERAMIC CHIP 100000PF C217 1-162-968-11 CERAMIC CHIP 0.0047uF 10%...
  • Page 67 RCD-W7V BD-R Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C395 1-162-964-11 CERAMIC CHIP 0.001uF IC503 8-759-082-61 IC TC4W53FU(TE12R) C396 1-162-912-11 CERAMIC CHIP 0.5PF IC504 8-759-082-61 IC TC4W53FU(TE12R) C399 1-162-965-11 CERAMIC CHIP 0.0015uF 10% < COIL >...
  • Page 68 RCD-W7V BD-R Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R238 1-216-864-11 METAL CHIP 1/16W R318 1-216-298-00 METAL CHIP 1/10W R240 1-216-829-11 METAL CHIP 4.7K 1/16W R319 1-216-801-11 METAL CHIP 1/16W R241 1-216-813-11 METAL CHIP 1/16W...
  • Page 69 RCD-W7V BD-R Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3A4 1-216-834-11 METAL CHIP 1/16W R5S2 1-216-864-11 METAL CHIP 1/16W R3A5 1-216-833-11 METAL CHIP 1/16W R5S3 1-216-864-11 METAL CHIP 1/16W R5S4 1-216-864-11 METAL CHIP 1/16W R3A7...
  • Page 70 RCD-W7V Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < COIL > R984 1-247-807-31 CARBON 1/4W < REMOTE RECEIVER > L902 1-410-482-31 INDUCTOR 100uH RC901 < LED > 8-749-016-29 IC RPM6938 LD901 8-719-301-46 DIODE SEL2413E < SWITCH >...
  • Page 71 RCD-W7V POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4728-642-A POWER BOARD, COMPLETE MISCELLANNEOUS ********************* ************** Note: Parts with no description are out of service. 1-824-266-11 WIRE (FLAT TYPE) (20 CORE) 7-685-545-14 SCREW +BTP 3X6 TYPE2 N-S...

  • Page 72: Revision History

    RCD-W7V REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2001.

Table of Contents