Table of Contents
Advertisement
35
3. Battery Pack Replacement Procedure
Replace the battery pack in the following procedure:
1.
Exit from all applications and shutdown OS.
2.
Turn off the power of the server and remove all the power cords connected to the
power unit from the receptacles.
3.
Remove the side cover following the User's Guide of the server.
4.
Remove all the cables from the disk array controller and the server.
5.
Remove the screw fixing the disk array controller. Then remove the disk array
controller from the server.
6.
On the rear face of the disk array controller, remove the screws (3) fixing the
BBU.
Advertisement
Table of Contents
