GE GE314 Operating Manual page 49

9. 5.3 HOLIDAY CODE
☞. H oliday Code is to link the Holiday Schedule to the Time Schedule. T/S has 5 Time Intervals for holidays and
th is Time Intervals are only applied to the dates of this Holid
' 00' which means no holidays are applied t
Use <4> or <6> key to scroll up and down the T/S Code (01~10) and press <ENT> key to enter 2digit Holida
Schedule Code and press <ENT> key to store Holiday Index to the memory.
Press <ESC> key to return to the menu.
9.5.4 READER#1 MODE TIME SCHEDULE
☞. There are 3 system operating mode, RF Only Mode, RF+F/P Mode and RF+PW+F/P Mode. You can setup one
of the system operating mode from [F2 SETUP MODE]->[R1 MODE SETTING] menu. However, you want
to apply different operating mode for a certain Time Interval for all users. For example, you want to access the
door by just presenting the card for the time from 09:00 to 17:00 and you want to use Fingerprint verification
for the rest of the time. In this case, setup [R1 MODE SETTING] to RF+F/P Mode which is for the system
operating mode and program "01" T/S Code which includes a Time Interval 09:00-17:00 then link "01" T/S
Code to this function, R1 MODE T/S setting here.
To link a T/S Code (01~10) to Reader#1 Mode, press <ENT> key. Enter 2digit T/S Code and press <ENT>
key to store T/S Code to R1 MODE to the memory.
Press <ESC> key to return to the menu.
☞ . There are 3 system operating mode,
M ode.
Y ou can select one of the system operating mode fr
however, you want to apply different operating mode
'2' – RF + Finger Mode
'3' – RF + PW + Finger Mode
9 .5.5 R EADER#2 MODE TIME SCHED
READER#2 MODE TIME SCHEDULE setting is the same as 9.5.4 READER#1 MODE T/S setting.
o T/S.
ID Only Mode, ID + Finger(Password) Mode and ID + PW + Finger
om [F2 SETUP MENU]->[READER#1 MODE SETTING]
ULE
49
ay Schedule. Default Holiday Schedule Code is
y