Table of Contents
Advertisement
Accessing the EC321 Manager GUI
1.
To start the program, double-click the shortcut icon
desktop.
2.
If you are prompted to enter the Personal Identification Number (PIN) code, enter the
correct one and click OK.
You can try three times to enter your PIN code. If you failed to do that after three times,
your UIM card would be locked. If this happens, use the PIN Unblocking Key (PUK)
code to unlock it.
You can try 10 times to enter your PUK code. If you failed to do that after 10 times,
your UIM card cannot be used. If this happens, cont
3.
When you failed to enter the PIN code or the PUK code, you can click Cancel to skip
over the authentication of the PIN code. Then, the functions related to the UIM card
such as connecting to the Internet, making and answering calls, sending and receiving
text messages, and reading the messages reco
you. However, you can still make emergency
The PIN code and the PUK code are provided by your operator
how to modify and enable/disable your PIN code, refer to "PIN Code M
Exiting the EC321 Manager
Select File > Exit and you can perform the following operations:
Select Quit application to exit the EC321 Manager.
Select Shut down device to exit the EC321 Manager and stop the data Card. If you want
to re-access the network service
Introduction to the Main Interface
Main Interface Overview
The initial interface after the EC321 manager starts is as follows.
6
The EC321 M
, plug and insert the device again.
of the EC321 Manager on the
act your network operator.
rded in the UIM card are not available for
calls.
14
anager GUI
Description
. For information about
anagement."
Advertisement
Table of Contents
