Table of Contents
Advertisement
10. SPECIFICATIONS
10. SPECIFICATIONS
10.1 Basic Specifications
Item
Power consumption
Operating temperature
Relative humidity
Dimensions
Weight
AC adapter
Supply voltage
(Auto-sensing)
Dimensions
Power cord
CPU
BIOS ROM
RAM
Capacity
Type
Socket
Interface
Touch panel method
UPS
Hard disk drive
Floppy disk drive
LAN interface
PC card
MCR
AC 100V Input
Standby: 48W, 0.49A
Operation: 57W, 0.58A
AC 240V Input
Standby: 51W, 0.25A
Operation: 57W, 0.28A
(When the double HDD, HS-530 Touch Scanner, LIUST-53 Display Unit,
USB-KB, and USB-FDD are connected.)
POS terminal:
DC 15V, 4.5A max.
5°C to 35°C
10% to 80%RH (no condensation)
296 mm (W) x 278 mm (D) x 307.6 mm – 283.7 mm (H) (Without MCR)
335.9 mm (W) x 278 mm (D) x 307.6 mm – 283.7 mm (H) (With MCR)
7.1Kg (including options)
AC 100V – 127V +10%, -10% 50/60Hz
AC220V – 240V +10%, -10% 50/60Hz
59.0 mm (W) x 133.0 mm (D) x 33.5 mm (H)
A power cord is not included in this product. Please use one complied
with each country's safety standard. For details, please contact the
nearest TOSHIBA TEC service representative.
Intel ULV Celeron 650MHz with 256KB secondary cache
512KB Flash ROM
512MB, 256MB, or 128MB memory can be installed in each slot.
DDR SDRAM PC2100, 133MHz clock, 2.5V unbuffered type, without
ECC, interface SSTL-2
200-pin SO-DIMM x 1
RS-232C x 4, Parallel x 1, USB x 3, Drawer x 2 (24V type), PS-2 x 2
Analog resistor film
Available when the UPS (option) and driver are installed.
Max. 2 units of 2.5-inch HDD (option) can be connected.
External FDD (option)
10/100 BASE-T (Wake on LAN)
PCMCIA TYPEII x 1 (option)
Standard on the ST-70-U631G model. ISO-1, 2-track one-sided type
10- 1
Description
EO1-12028
10.1 Basic Specifications
Advertisement
Table of Contents
