Help Text Activation; Voice Commands - Nokia 3155 User Manual

FCC draft
S e t t i n g s
Touch tones are sent during an active call. You can send them manually from
your device keypad, or send them automatically by saving them in your device.
Set type
In the standby mode, select Menu
touch tones and one of the following options:
Continuous—Used to set the tone sound for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the
option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can specify touch-tone length for the
select Menu > Settings > Phone
(0.1 seconds) or Long (0.5 seconds).
Start-up tone
You can select to have a start-up tone when you first turn on your device. In the
standby mode, select Menu > Settings
Power-down tone
You can select to have a power-down tone when you turn off your device. In the
standby mode, select Menu > Settings

Help text activation

Your device displays brief descriptions for most menu items. When you arrive at a
feature or menu, pause for about 14 seconds and wait for the help text to display.
If necessary, use the scroll key to page through the full help text.
The default setting for help text is On. However, you can turn help text on or off.
In the standby mode, select Menu
or Off.

Voice commands

Before using voice tags, note the following:
• Voice tags are not language-dependent, but depend on the speaker's voice.
• You must say the name exactly as you said it when you recorded it.
68
> Settings > Phone > Touch tones
Touch tone length
Fixed option. In the standby mode,
> Touch tones > Touch tone length
> Phone > Start-up tone >
> Phone > Switch off tone
> Settings > Phone > Help text activation
> Manual
> Short
On or Off.
> On or Off.
> On