7.5.2.
CD Mechanism Error Code Table (CD Mechanism Unit)
Error Code
Diagnostic Contents
CD H15
CD Open Abnormal
CD H16
CD Closing Abnormal
F26
Communication between
CD servo LSI and micro-p
abnormal.
7.6.
Sales Demonstration Lock Function
7.6.1.
Entering into Sales demonstration lock mode
Here is the procedures to enter into the Sales demonstration lock mode.
Step 1: Turn on the unit.
Step 2: Select to any mode function.
Step 3: Press and hold [
The display will show upon entering into this mode for 2 sec.
Note: [
] button is invalid and the main unit displays "LOCKED" while the lock function mode is entered.
OPEN/CLOSE
7.6.2.
Cancellation of Sales demonstration lock mode
Step 1: Turn on the unit.
Step 2: Select to any mode function.
Step 3: Set volume to Vol 19.
Step 4: Press and hold [
The display will show upon entering into this mode for 2 sec.
Description of error
During operation
POS_SW_R On fail to be
detected with 4 sec. Error
No. shall be clear by force
or during cold start.
During operation
POS_SW_CEN On fail to
be detected with 4 sec.
Error No. shall be clear by
force or during cold start.
During switch to CD func-
tion, if SENSE = "L" within
failsafe time of 20ms.
] and [CD] keys for 5 sec or more.
OPEN/CLOSE
] and [CD] keys for 5 sec or more.
OPEN/CLOSE
Automatic FL Display
Remarks
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.
Press [ ] on main unit for
next error.