Before Setting Up The Scanner; Connecting The Ac Adapter - Canon imageFORMULA ScanFront 400 Set Up And Operation Manual

3.

Before Setting Up the Scanner

Before setting up the scanner, you need to move it to the installation site, and connect the AC adaptor and network cable.
❏ Connecting the AC Adapter
Follow the procedure shown below to connect the AC adapter.
CAUTION
Make sure to use only the AC adapter and power cord included with the scanner.
a Connect the power cord and AC adapter.
b Insert the plug of the AC adapter into the power connector.
c Connect the power cord to the wall outlet.
24
Chapter 2 ScanFront Setup
The shape of the
power plug varies
by country and
region.