Panasonic AJ-YA94G Operating Instructions Manual page 4

6.
From the back, insert the AJ-YA94G half-way, and
mount the DV connector onto the AJ-YA94G using
the two screws.
DV connector
7.
Insert the AJ-YA94G all the way into the slot while
taking care not be pinch any of the cables.
Insert the connector securely by pushing down on it
from the top of the board.
E-5
8.
Attach the AJ-YA94G using the two screws which
were previously used to attach the slot cover.
9.
Attach the board clamp using the two screws.
There is a groove on the bottom of the board
clamp. Attach the screws after aligning the groove
with the board.
Board
Board clamp
Groove
E-6