Alphabetic Reference - Siemens HiPath 3000 Operating Instructions Manual

Alphabetic Reference

This glossary provides administrators with basic information for performing
configuration and diagnostics on the optiPoint 410 entry S V6.0.
• The section "Alphabetic Reference" explains terms found in the menus
in alphabetic order.
• Clicking the icons will bring you to the relevant function descriptions:
– Using the icons on the optiPoint 410 entry S V6.0
– Using the icons via the web interface
• This is followed by the chapter "Abbreviations and Technical Terms".
Append codes
Append codes are control functions that are accepted at any position with-
in the repertory dialing sequence.
The following options are available for selection:
Function
OK
Clear
Consult
Pause
page 26
Auto-dial timer
Timeslot (in seconds) between the last digit input and the start of the dial-
ing procedure.
• Minimum value: 1
• Maximum value: 8
• Default value: 6
page 28
Country
From the list field, select the country where you would like to install the
optiPoint 410 entry S V6.0. Country-specific settings such as ringer or busy
tone, for example, are configured with this option.
The following options are available for selection:
• United States
• Germany
• France
• Italy
• Spain
• Austria
Status Indication
Any characters following this function are sent im-
mediately as DTMF signals after the call has been
answered.
Clear the current call at this point.
This function is not supported by optiPoint 410 en-
try.
Any characters following this function are sent af-
ter three seconds.
Web Interface
29