Canon imagePRESS C800 Service Manual page 79

Canon
Table 44 – Periodic Maintenance Items Continued
 Clean
item
Post-secondary Transfer Sensor
Pre-fixing Feed Belt
Secondary Transfer Static
Eliminator
Post-secondary Transfer Guide
ITB Drive Roller
ITB Steering Roller
ITB Inner Scraper
ITB Idler Roller A
ITB Idler Roller B
Secondary Transfer Inlet Upper
Guide Unit
Wraparound Prevention Guide
ITB HP Sensor
ITB Displacement Sensor (Right)
ITB Displacement Sensor (Left)
Fixing Refresh Roller
Fixing Belt Unit Gear
Pressure Belt Unit Gear
Fixing Drive Unit Gear
Lower Belt Detection Roller,
Sensor Base
Fixing Inlet Guide, Fixing Inlet
Sensor Flag
Inner Delivery Unit Separation
Plate
Feed Roller (Vertical path)
Slave Roller (Vertical path)
Decurler Guide
Decurler Roller 1
Decurler Roller 2
54 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier.
Data is subject to change depending upon many factors including, without limitation, monthly copy
volume, environment, type of image printed and customer handling of the equipment.
Canon imagePRESS C800/C700 Service Guide
Revision 2
Periodic Maintenance Items (Based on LTR Paper)
x Lubricate
Interval (pages)
imagePRESS imagePRESS
C800 C700
300,000
300,000
300,000
300,000
As needed basis
As needed basis
As needed basis
As needed basis
As needed basis
As needed basis
As needed basis
As needed basis
As needed basis
As needed basis
600,000
600,000 500,000
600,000 500,000
600,000 500,000
600,000 500,000
As needed basis
As needed basis
300,000
300,000
300,000
300,000
300,000
Canon imagePRESS C800/C700 Service Guide
54
Action
Clean it with a blower brush.


Clean it with alcohol and lint-free paper





Clean it with alcohol and lint-free paper when

replacing the ITB, Primary Transfer Roller, or
Secondary Transfer Inner Roller.



Clean it with a blower brush when replacing the

ITB, Primary Transfer Roller, or Secondary

Transfer Inner Roller.

The counter value in service mode indicates the
time (the number of seconds) where the Refresh

Roller is engaged. Clean it with alcohol and lint-
free paper
Apply grease (FY9-6036, SE1107) to cover the
grease-applicable area on the gear teeth surface
×
when replacing the Pressure Belt Unit.
Apply grease (FY9-6036, SE1107) to cover the
grease-applicable area on the gear teeth surface
×
when replacing the Fixing Belt Unit.
Apply grease (FY9-6036, SE1107) to cover the
grease-applicable area on the gear teeth surface
×
when replacing the Fixing Belt Unit, Pressure
Belt Unit, or Fixing Assembly.
Clean it with dry lint-free paper when replacing

the Pressure Belt Unit.



Clean it with alcohol and lint-free paper





Adjust
Remarks
October 2014
Page 73