Features And Controls; Safety Rules - Craftsman 580.325600 Owner's Manual

KNOW YOUR GENERATOR
Read the owner's manual and safety rules before operating your generator.
Compare the illustrations with your generator to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Spark Arrester Muffler
(not shown)
Fuel Valve
(not shown)
Choke
Lever
Air Cleaner
Recoil Handle
Starter
Rocker Switch
(on engine shroud)
120 Volt AC, 20 Amp, Duplex Receptacles — May
be used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical,
lighting, appliance, tool and motor loads.
120/240 Volt AC, 30 Amp Locking Receptacle —
May be used to supply electrical power for the
operation of 120 and/or 240 Volt AC, 30 Amp, single
phase, 60 Hz electrical, lighting, appliance, tool and
motor loads.
Air Cleaner — Protects engine by filtering dust and
debris out of intake air.
Choke Lever — Used when starting a cold engine.
Circuit Breakers (AC) — Push to reset circuit
breakers are provided to protect the generator against
electrical overload.

FEATURES AND CONTROLS

Fuel Tank
(2) 120 Volt AC, 20 Amp
Duplex Receptacles
Oil Fill
Fuel Tank — Capacity of five (5) U.S. gallons.
Fuel Valve — Used to turn fuel on and off to engine.
Grounding Fastener — If required, please consult a
qualified electrician, electrical inspector, or local
agency having jurisdiction.
Oil Fill — Add engine oil here.
Recoil starter — Used to start the engine.
Rocker Switch — Set this switch to "On" before using
recoil starter. Set switch to "Off" to switch off engine.
Spark Arrester Muffler — Exhaust muffler lowers
engine noise and is equipped with a spark arrester
screen.
5
Circuit
Breakers (AC)
120/240 Volt AC,
30 Amp
Receptacle
Grounding Fastener