Table of Contents
Advertisement
Recommended Tools
The following tools are recommended to assemble the Adjustable Height Table Frame Kit:
1
13 mm and 19 mm combination wrench
1
5, 6, 8, and 10 mm allen wrenchs
1
flat tip screwdriver
1
electric drill
1
soft faced mallet
1
adjustable wrench
Specifications
Adjustable Height Workstation Kit Part Number ........................................................................... 8981 021 140
Frame Height .................................................................................................................. 802 – 1302 mm Adjustable
Frame Width ................................................................................................................................. 990 mm (38.976 in)
Table Top Width .....................................................................................................1000 mm min. – 1400 mm max.
Frame Depth ................................................................................................................................. 595 mm (23.425 in)
Maximum Load, Centered .............................................................................................................. 400 lb (181.5 kg)
Maximum Load, Distributed ........................................................................................................... 400 lb (181.5 kg)
Maximum Moment @
Shipping Weight W/Out Table Top:
Carton 1 – Telescoping Actuators and Components ........................................................... 40.5 lb (18.4 kg)
Carton 2 – Frame Components ..................................................................................................45.5 lb (20.7 kg)
.................................................................................................................... 500 Nm (Static)
1
#1 and #2 phillips screwdriver
1
tape measure
1
square
1
2 mm and 3 mm drill bits for drilling pilot holes
in the table top.
1
level
7
Advertisement
Table of Contents
