Philips AECP3000 User Manual page 13

• For an iPod/iPhone with a 30-pin/lightning
connector, connect the type A side of
the corresponding Apple USB cable (not
supplied) to the CHARGING socket on
the back of the WeCall phone.
1
Lead the USB cable through the table
stand and the hole in the dock, then
connect it to the matching docking adapter.
2
Plug the docking assembly into the dock.
3
Dock you mobile device.
» The WeCall phone starts to charge
your mobile device.
Tip
•
The above step 2 is not required for Android users, as
the Android docking adapter is assembled with a USB
cable by default.
To detach a docking adapter and cable
1
Hold both the left and rights sides of the
docking adapter to unlock and pull it out
of the dock.
2
Release the inner locks and detach the
cable from the docking adapter.
EN 11