How To Remove Covers Of Inverter - Toshiba TOSVERT VF-AS3 Instruction Manual

2. 2

How to remove covers of inverter

Prohibited

Mandatory
action
Mandatory
action
Before removing the front cover in order to wire for power terminals or control terminals, detach the cable
for operation panel as shown below.
A1E, A2E, A3E
Violet
Important
2. Installation and wiring
• Never open the front cover when the power is on.
The unit contains high voltage parts and contact with them will result in electric shock.
• Confirm the gasket is put into the groove of front cover before putting front cover.
If the gasket is not put into the groove of front cover correctly, it can result in the electric shock
or fire.
• Turn the power off when removing the front cover.
If the power is on, it can result in electric shock or injury.
• After wiring is complete, be sure to replace the front cover and close Ethernet connector cover
and cable cramp.
Otherwise, it can result in electric shock or fire.
• When opening and mounting the front cover or the power terminal block with a screwdriver, be
sure not to scratch your hand as these results in injury.
Gray
• If a gasket is removed from the cover, put the gasket back into the groove of the cover.
WARNING
CAUTION
Gray
2-6
E6582162c
Violet