The Brightness Of The Screen - Brother LT-5100 User Manual

LT-5100 PC Real-time Video Controller V7.6
8．3 The brightness of the screen
The screen brightness can be adjusted by dragging the slip to achieve the best viewing
effect，as shown in Figure 26. This setting can be done when the viewfinder frame is working.
8．4 Setting messages
1． Import text: Import the text in "Message", then click on the key "Refresh".
2． Set the moving mode of the message: click on the "moving" key and will see a dialog as
shown in Figure 27.after finishing the settings, clicking on "OK" to apply, or "Cancel" to give
up. There are the following three settings:
Moving Orientation
①
Character Position
②
Moving sp
③
：there are five orientations, Left（The message is moving from right
to left） 、 Right （ Moving from left to right） ,Up （Moving from down to
up） 、Down（Moving from up to down）,Static（The text is static）.
：Top（The message is displayed on the top of the screen）,Center
（Displayed on the center of the screen） , Bottom （Displayed on the
bottom of the screen）.
eed：the moving speed of the message can be changed by dragging the
sliding strip，the Minimum and Max. speed is 1 Pix/s and 100 Pix/s.
respectively.
Figure 27 The moving mode of the words
Figure 26
Page 19 of 22