Page 1
OREWORD 02.96 93.001 0 0 14 J an uar y 20 11...
Page 2
Philips Selecon assumes no responsibility for any errors or omissions which may appear in this manual. For comments and suggestions regarding correc- tions and/or updates to this manual, please visit the Philips Selecon web site at www.seleconlight.com or contact your nearest Philips Selecon office.
Page 3
ORWARD How To Obtain Warranty Service A copy of the Philips Selecon Limited Warranty is available on the Philips Selecon web site at www.seleconlight.com or by contacting customer service at 1.214.647.7880. To obtain warranty service, please contact customer service at 1.214.647.7880 or entertainment.service@philips.com...
Page 4
Confidential Property Disclosure This technical manual is confidential property of Philips Selecon All information contained herein is the sole and exclusive property of Philips Selecon and may not be used, disclosed, or reproduced in any manner without the prior written consent of Philips Selecon The information furnished in this manual is for informational use only and is subject to change without notice.
Page 5
ORWARD • IEC 61000-6-3: 2006; EN 61000-6-3: 2007 Electromagnetic Compatibility (EMC) - Part 6-3, Generic Standards - Emission Standard for residential, commercial, and light-industrial environments We certify that the product conforms to the protection requirements of Low Voltage Directive 2006/95/EC and Council Directive 2004/108/EC Safety Notice It is extremely important to read ALL safety information and instructions provided in this manual and any accompanying documentation before installing and operating the...
ABLE OF ONTENTS Table of Contents Forward Table of Contents Introduction About This Manual ...................... 1 Additional Documentation ................... 1 Customer Service ......................2 Technical Bulletins and Notices ................2 Product Overview and Descriptions Features & Specifications Standard Features ......................4 Standard Specifications ....................
Page 7
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL RJ45 to Motherboard Data Cable Assembly ............. 34 Display to RJ45 COMM Cable Assembly..............35 RJ45 to Display 12V Cable Assembly ..............36 RJ45 to Motor PCB 12V Cable Assembly ..............37 PL3 AC Input Cable Assembly .................
Page 8
ABLE OF ONTENTS 02.96 93.001 0 0 14 J an uar y 20 11...
Refer to the Philips Selecon Limited Warranty on the Philips Selecon web site for more information. Additional Documentation A support web page for Philips Selecon luminaires is available on the Philips Selecon web site at www.seleconlight.com (follow the Support link).
Customer Service Our Goal At Philips Selecon, we are committed to providing you the highest quality in customer service. Our comprehensive resources are available to help your business succeed and ensure you get the full benefit of being a Philips Selecon customer. Whether your needs are telephone/troubleshooting assistance, product training or technical service, our full-time staff of experienced professionals are on-hand to provide support.
Product Overview and Descriptions This section provides an overview of luminaire features, components and operations. • Features & Specifications • Major Components • Principles of Operation • Special Care and Handling 02 .96 93.00 10 0 14 Jan ua ry 2 011...
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL Features & Specifications Standard Features The PL3 LED luminaire features three bright RGBW LED light sources, full color mixing, adjustable beam angles, and on-board LCD menu system. The PL3 LED luminaire contains the following standard features: •...
ETL / cETL Listed (North America models) and CE Marked (International models) Note: Common model specifications shown. For specific model specifications, features, and accessories, refer to the product specification sheet or visit the Philips Selecon web site at www.seleconlight.com for more details.
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL Major Components PL3 LED Luminaire The following illustration shows the major luminaire components and controls. 1) LCD Display Menu (see “Menu Display” on page 7 for more information) 2) Lens (Head) Assembly 3) Tilt Locking Knob 4) Yoke Assembly 5) DMX512 In/Out Connections (see detail)
RODUCT VERVIEW AND ESCRIPTIONS Menu Display The Menu System Display is used to access the menu system, which is a programma- ble set of commands used to address, operate, and test the luminaire. The menu system is controlled by a series of buttons with options / settings displayed on a backlit LCD Display.
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL Luminaire Components The following illustration shows the major sub-assemblies which are located in the luminaire head assembly. Luminaire Yoke Assembly Upper Luminaire Head Cover Tilt Lock Knob Rear Handle Rear Cover Assembly Head Assembly See Detail Lower Luminaire Head Cover...
RODUCT VERVIEW AND ESCRIPTIONS Principles of Operation PL3 Functional Block Diagram AC Input INTENSITY FOCUS LED Driver Board 1 Display Voltage MENU PRESET Supply PL3 Display and Control Board DMX512 LED 1 Input Infrared IR Input (Programming Input) LED Driver Board 2 Motor Driver PCB LED 2...
If you have any questions regarding the use or care of your PL3 LED Luminaire, please contact Philips Selecon technical support or your local Authorized Dealer. 14 J an uar y 20 11...
RODUCT VERVIEW AND ESCRIPTIONS General Care and Equipment Handling Below are some basic tips and information on handling PL3 LED Luminaires and their associated components. Locations/Use PL3 LED Luminaires are designed for dry locations only. Exposure to rain or moisture (including, but not limited to, fog machines, misters, etc.) may damage luminaires.
Page 20
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL NOTES 14 J an uar y 20 11 02 .9 693.00 10 0...
Illustrated Parts Breakdown This chapter contains illustrated parts breakdowns for all PL3 LED luminaire assemblies. • Drawing Tree • Top Assembly • Head • Cables Note: Cables are available as complete assemblies only. The informa- tion contained in this section is for reference only. 02.96 93.001 0 0 14 J an uar y 20 11...
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL PL3 Moving Zoom Assembly 21.9693.0130 Rev C Refer to Figure 4. Item Qty. Description 10.9693.0140 LENS RING, FRONT 10.9693.0141 LENS RING, REAR 10.9693.0150 CLAMP, NUT, LINEAR MOTOR 10.9693.0242 BACKING PLATE, ZOOM NUT 10.9693.0740 LINEAR RAIL, LEFT 10.9693.0741...
Page 29
LLUSTRATED ARTS REAKDOWN PL3 Moving Zoom Assembly (continued) (x3) (x9) See Note (x2) (x2) (x3) NOTE: *Shown for reference / positioning only. Part of motor in assembly 21.9693.0255. Figure 4: PL3 Moving Zoom Assembly 02.969 3.0010 0 14 J anu ary 201 1...
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL PL3 Light Engine (3 Source LED) Assembly 21.9693.0600 Rev E Refer to Figure Item Qty. Description 10.9690.0341 SEAL, LIGHT PIPE, TOP 10.9693.0332 TUBE, SHIELD, LIGHT PIPE 10.9693.0345 SIDE RAIL 10.9693.0670 REAR AIR BAFFLE 17.9693.0660 BOARD ASSY, PLX AUX MOTOR CONTROL 21.9693.0255...
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL PL3 LED Driver Board Assembly 21.9693.0652 Rev. A Refer to Figure Item Qty. Description 10.9692.0237 EMI SHIELD, BODY 10.9692.0238 EMI SHIELD, LID 10.9693.0650 MOUNTING BRACKET, LED DRIVER 24.9690.0570 BOARD ASSY, LED DRIVER 53.6576.0034 SCREW, M4 X 8 MM LG PPZ SEMS 55.1000.0010...
LLUSTRATED ARTS REAKDOWN Cables Rear Cover Ground Cable Assembly 25.9693.0018 Rev A Refer to Figure 5.0" Black Figure 11: Rear Cover Ground Cable Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only. 02.969 3.0010 0 14 J anu ary 201 1...
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL Motherboard to Motor Comm Cable Assembly 25.9693.0007 Rev B Refer to Figure Figure 12: Motherboard to Motor Comm Cable Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only.
LLUSTRATED ARTS REAKDOWN Beam Motor Cable Assembly 25.9693.0011 Rev B Refer to Figure BEAM Figure 13: Beam Motor Cable Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only. 02.969 3.0010 0 14 J anu ary 201 1...
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL RJ45 to Motherboard Data Cable Assembly 25.9693.0013 Rev B Refer to Figure Figure 14: RJ45 to Motherboard Data Cable Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only.
LLUSTRATED ARTS REAKDOWN Display to RJ45 COMM Cable Assembly 25.9693.0006 Rev B Refer to Figure Figure 15: Display to RJ45 COMM Cable Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only. 02.969 3.0010 0 14 J anu ary 201 1...
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL RJ45 to Display 12V Cable Assembly 25.9693.0009 Rev B Refer to Figure 8" BLUE BLUE BLACK BLACK Figure 16: RJ45 to Display 12V Cable Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only.
LLUSTRATED ARTS REAKDOWN RJ45 to Motor PCB 12V Cable Assembly 25.9693.0010 Rev B Refer to Figure 14" BLUE BLUE BLACK BLACK Figure 17: RJ45 to Motor PCB 12V Cable Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only.
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL PL3 AC Input Cable Assembly 25.9693.0001 Rev B Refer to Figure ONE WRAP PER WIRE Figure 18: PL3 AC Input Cable Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only.
LLUSTRATED ARTS REAKDOWN +12V to Chassis Cable Assembly 25.9693.0002 Rev A Refer to Figure 9" Black Figure 19: +12V to Chassis Cable Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only. 02.969 3.0010 0 14 J anu ary 201 1...
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL -12V to Board 1 Cable Assembly 25.9693.0003 Rev A Refer to Figure 5" Blue Figure 20: -12V to Board 1 Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only.
LLUSTRATED ARTS REAKDOWN -12V to Board 2 Cable Assembly 25.9693.0004 Rev A Refer to Figure 9" Blue Figure 21: -12V to Board 2 Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only. 02.969 3.0010 0 14 J anu ary 201 1...
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL -12V to Board 3 Cable Assembly 25.9693.0005 Rev A Refer to Figure 22" Blue Figure 22: -12V to Board 3 Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only.
LLUSTRATED ARTS REAKDOWN 12V to Data Distro Cable Assembly 25.9693.0008 Rev A Refer to Figure BLACK BLUE Figure 23: 12V to Data Distro Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only. 02.969 3.0010 0 14 J anu ary 201 1...
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL DMX to Display Cable Assembly 25.9693.0012 Rev A Refer to Figure Figure 24: DMX to Display Assembly Note: Cables are available as complete assemblies only. The information contained in this section is for reference only. 14 J an uar y 20 11 02 .9 693.00 10 0...
LED luminaire. These improvements (if any) have been incorporated into this manual. ECHNICAL ESCRIPTION ULLETIN For assistance with technical bulletins or notices, please contact Philips Selecon Customer Service at 1.214.647.7880 or entertainment.service@philips.com. PL3 LED Luminaire Technical Notice List The following table identifies the current technical notices associated with the PL3 LED luminaire.
Page 54
PL3 LED L HILIPS ELECON UMINAIRE ERVICE ANUAL NOTES 14 J an uar y 20 11 02 .9 693.00 10 0...
Page 55
NOTES 02.96 93.001 0 0 14 J an uar y 20 11...