Table of Contents
Advertisement
Palette VL
L
C
C
I
& S
G
IGHTING
ONTROL
ONSOLE
NSTALLATION
ETUP
UIDE
If you select "Block new values into cue range," each cue in the range will get the new values as determined by the
Record Options you selected with [S3] in the "Record" dialog box. This may result in Redundant Data which may or
may not be desirable (normally only desirable in multiple cue list environments where you want to be sure each cue
will be in total control of those lights, regardless of what other cue lists are doing). By default, [S2] "Track new
values through cue range" is selected (so pressing [ENTER] will close this dialog box using this option). If you select
this option, the values will be recorded in the first cue in the range and they will track until the end of the range. You
can still check [S10] "Cue Only Mode" in the "Record" dialog box to not track beyond the end of the range, even
when using the [S2] "Confirmation" option.
Tips:
• You can use the [WHEEL] to change many of the controls in this dialog box. Holding down [SHIFT] while using
the Wheel changes numeric values by 0.1.
• You can quickly record a cue to a cue list that is not currently selected by pressing [REC] [SELECT].
Detailed Description (Non-Windows UI Console Personalities)
These versions work via the command line as opposed to the Record Cue dialog box. Access to all options within the
dialog box can be found in the softkeys.
If a softkey is showing a green arrow, clicking on this softkey will enable more softkeys directly above it on the M-
keys.
65
Recording a Cue
Advertisement
Table of Contents
