Sanyo TUHD5500HDD User Manual page 13

Fig. 8.2.4
Fig. 8.2.5
Fig. 8.2.6
Note: You can select {Auto} to optimize the hand-shaking and compatibility between
your TV seting, Display and the Set Top Box digital output {HDMI socket}. In the event
of an incompatibility in Auto mode, or if an adapter is being used, manually select {HDMI
Output} or {DVI Output} in order to view a High Definition picture on your TV Set. If {DVI
Output} or your viewing device does not support HDMI digital audio, you may have to
make a separate audio connection between the Set Top Box and display / audio amplifier.
Step3b: Choose TV Width Height Ratio
Press [CH +/-,
•
to {Width Height Ratio} as shown in Figure
8.2.4.
Press [VOL +/-,
•
or {16:9}
Press [OK] button to save setting.
•
Step3c: Choose TV Full Screen Ratio,
Brightness and Contrast
Press [CH +/-,
•
{Sataration,Brightness,Contast} as shown
in Figure 8.2.5
Press [VOL +/-,
•
100%
Press [OK] button to save setting
•
Refer to above operations to set up
•
brightness and contrast
Step 4: Set the Digital Video Output
Press [CH +/-,
•
to {Digital Video}as shown in Figure 8.2.7.
Press [VOL +/-,
•
between {Auto} or {HDMI Output}or {DVI
Output}.
Press [OK] button to save setting.
•
] button to move cursor
] button to select {4:3}
] button to move cursor to
] button to select 1%-
] button to move cursor
] button to select
10