2.2.4 Connection to FX-232AW / FX0N-232ADP
MITSUBISHI
FX1S/FX1N/FX2N
+ FX2N-CNV-BD +
FX0N-232-ADP
MITSUBISHI
FX + FX-232AW
i)
Connect the 9-pin to 25-pin cable, type MODEM-R2A-CAB, between the
Data RS232 port on the front of the MODEM and the RS232C Connector
on the FX232AW / FX0N-232ADP module.
ii)
Then follow the instructions in Section 2.2.1 ii) to iv) above
2.2.5 Connection to DESK Version
i)
Connect the PC to Modem Data cable, type MODEM-PC9-CAB, between
the Data RS232 port at the rear of the MODEM and a spare
communication port on your PC.
ii)
Then follow the instructions in Section 2.2.1 ii) to iv) above.
MODEM-R2A-CAB
MODEM-PC9-CAB
5
logi
RD
CD
CS
mode
DA
RS
VOI
LI
1
2
O
OH
CS
TR
CD
SD
RD
logilink
336