Panasonic KX-TDE100 Features Manual page 228

1.19 Message Features
Pattern 11
Pattern 12
• It is possible to set Message Waiting while hearing a ringback tone, busy tone, or DND tone.
• Messages are always left on the original destination extension, regardless of that extension's FWD
settings.
• Both the extension that sent and received a message waiting notification can cancel the left message.
• If the extension that received a notification calls back the extension that sent the notification, and the
call is answered, the notification will be cleared automatically. However, if a voice message has been
left on the VPS, whether the notification is cleared or not depends on the VPS settings.
Installation Manual References
3.6.7 SLC16 Card (KX-TDA0174) and MSLC16 Card (KX-TDA0175)
Programming Manual References
PC Programming Manual
2.7.20 [1-1] Slot—Extension Card Property—SLT Power Supply
2.8.9 [2-6-1] Numbering Plan—Main—Features—Message Waiting Set / Cancel / Call Back
2.8.11 [2-6-3] Numbering Plan—B/NA DND Call Feature—Message Waiting Set
2.8.18 [2-9] System Options
→ Option 3—Dial Tone—Distinctive Dial Tone
→ Option 5—SLT—Message Waiting Lamp Pattern
2.9.19 [3-8-1] VM(DTMF) Group—System Settings—VM DTMF Command—Listening Message
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—SLT MW Mode
2.10.5 [4-1-4] Wired Extension—Flexible Button—Type
2.10.13 [4-2-3] Portable Station—Flexible Button—Type
2.10.17 [4-3] DSS Console—Flexible Button—Type
PT Programming Manual
None
Feature Guide References
1.20.2 Flexible Buttons
3.1 Capacity of System Resources
228 Feature Guide
t
ON
OFF
t
ON
OFF
10.24 s 10.24 s
t=1.28 s
10.24 s 10.24 s
t=1.28 s
20.48 s
20.48 s