Lens Installation Procedure; Attach The Lens - Hitachi FL-701 User Manual

Lens Installation Procedure

1. Attach the lens

(1) Remove the lens cap. Then turn the product label of the lens upward and install the
lens in the projector.
Caution
■ Installing the lens in the projector with the lens cap on may lead to malfunction.
■ Take care to avoid hitting the surface of the lens on the projector when
attaching the lens as this may lead to malfunction.
■ Do not touch the connector of the lens or subject it to impact as this may lead
to malfunction.
(2) Support the lens, and move the lens lock lever to the upside (until the lens lock lever
clicks into the locked position).
Warning
■ To prevent the lens from falling off, after attaching the lens, check that it is
securely mounted and that the lens does not move. If the projector falls or topples
over, it could result in injury or damage to the projector and the surrounding
things.
Lens cap (rear)
Product label
Lens lock lever
8