Appendix C - Ip Address Configuration - D-Link DWL-G122 Quick Installation Manual

Appendix C - IP Address Configuration
To connect to a network, make sure the proper network
settings are configured for the DWL-G122.
Microsoft Windows XP:
For
Go to Start > right click on
select Properties > Double-click on the Network
Connection associated with the DWL-G122.
Click Internet Protocol (TCP/IP)
Click Properties
Dynamic IP address setup
Used when a DHCP server
the local network. (i.e. Router)
Select Obtain an IP address
automatically
Router or Access Point has
DHCP server enabled)
Select Obtain DNS server
address automatically
Click OK
Static IP address setup
Used when a DHCP server
on the local network.
Select Use the following IP address
IP address: 192.168.0.28
Subnet mask: 255.255.255.0
Input a static IP address in the same range as
the Wireless Router or Access Point.
Click OK
My Network Places
is available on
(if the Wireless
is not available
>
10