Kenwood NX-5800 Service Manual page 48

Item Condition
Panel tuning
mode
7. 1) Adj item:
Medium [M_LMT]
Trans- Adjust:[****]
mit 2) Adj item:
Power [Low1]→
Limit [Low5]→
[Center3]→
[High2]→
[High6]
PTT : OFF
Press [ ] key to
store the adjust-
ment value.
8. 1) Adj item:
Low [L_LMT]
Trans- Adjust:[****]
mit 2) Adj item:
Power [Low1]→
Limit [Low5]→
[Center3]→
[High2]→
[High6]
PTT : OFF
Press [ ] key to
store the adjust-
ment value.
9. 1) Adj item:
High [H_PWR]
Trans- Adjust:[****]
mit 2) Adj item:
Power [Low1]→
[Low5]→
[Center3]→
[High2]→
[High6]
Adjust:[****]
PTT : ON
Press [ ] key to
store the adjust-
ment value.
10. 1) Adj item:
Medium [M_PWR]
Trans- Adjust:[****]
mit 2) Adj item:
Power [Low1]→
[Low5]→
[Center3]→
[High2]→
[High6]
Adjust:[****]
PTT : ON
Press [ ] key to
store the adjust-
ment value.
1-48 (No.RA017<Rev.002>)
Measurement
PC test mode Test-
equip-
ment
1) Adj item: Power
[Medium Transmit meter
Power Limit] Ammeter
2) Adj item:
[Low1]→
[Low5]→
[Center3]→
[High2]→
[High6]
Press [Apply] but-
ton to store the ad-
justment value.
1) Adj item: Power
[Low Transmit meter
Power Limit] Ammeter
2) Adj item:
[Low1]→
[Low5]→
[Center3]→
[High2]→
[High6]
Press [Apply] but-
ton to store the ad-
justment value.
1) Adj item: Power
[High Transmit meter
Power] Ammeter
2) Adj item:
[Low1]→
[Low5]→
[Center3]→
[High2]→
[High6]
Press [Transmit]
button.
Press [Apply All]
button to store the
adjustment value.
1) Adj item: Power
[Medium Transmit meter
Power] Ammeter
2) Adj item:
[Low1]→
[Low5]→
[Center3]→
[High2]→
[High6]
Press [Transmit]
button.
Press [Apply All]
button to store the
adjustment value.
Unit Ter- Unit Parts
minal
Panel ANT Panel [Panel
tuning
mode]
[ ],
[ ]
[PC
test
mode]
[←],
[→]
Panel ANT Panel [Panel
tuning
mode]
[ ],
[ ]
[PC
test
mode]
[←],
[→]
Panel ANT Panel [Panel
tuning
mode]
[ ],
[ ]
[PC
test
mode]
[←],
[→]
Panel ANT Panel [Panel
tuning
mode]
[ ],
[ ]
[PC
test
mode]
[←],
[→]
Adjustment
Method
Write the value as
followings.
256 (Fixed)
Write the value as
followings.
256 (Fixed)
45W ±1W
12A or less
[PC test
mode]
Press [Apply
All] button to
store the
adjustment
value after all
adjustment
points have
been adjusted.
Note: [PC test
Medium transmit pow- mode]
er is the purpose of Press [Apply
the custom power (ad- All] button to
justment). store the
This power must be adjustment
lower than High trans- value after all
mit power. adjustment
In the production, this points have
Medium transmit pow- been adjusted.
er is adjusted at same
power as Low trans-
mit power.
Specifica-
tions
/Remarks